110 Adding and Replacing Parts
www.dell.com | support.dell.com
8If a Mini PCI card is not already installed, go to step9. If you are replacing a Mini PCI
card, remove the existing card:
aDisconnect the Mini PCI card from any attached cables.
bRelease the Mini PCI card by spreading the metal securing tabs until the card
pops up slightly.
cLift the Mini PCI card out of its connector.
9Align the new Mini PCI card with the connector at a 45-degree angle, and press the
Mini PCI card into the connector.
10 Connect the antenna cables from the Mini PCI card to the antenna connectors on the
computer.
NOTICE: The connectors are keyed for cor re c t insertion; do not forc e th e co nnections.
11 Lower the Mini PCI card toward the inner tabs to approximately a 20-degree angle.
12 Continue lowering the Mini PCI card until it snaps into the inner tabs of the
connector.
13 Replace the cover.
antenna connectors on card (2)
antenna cables (2)
3Y647bk0.book Page 110 We dnesday, April 2, 2003 3:24 P M