78 Using CDs, DVDs, and Other Multime dia
www.dell.com | support.dell.com
5Plug the single-connector end of the audio cable into the headphone connector on the
computer.
6Plug the two RCA connectors on the other end of the audio cable into the audio input
connectors on your television or audio device.
Enabling the Display Settings for a Television
ATI Video Controller
NOTE: Ensure that you properly connect the television before you enable the display settings.
1To op en th e Control Panel window, click the Start button and then click the Control
Pane l icon.
2Double-click the Display icon, click the Settings tab, and then click Advanced.
3Click the Displays tab.
4Click the upper-left corner of the TV button to enable the television.
5To play a DVD on the television, click the small "primary" button (resembles a
bull’s-eye) at the bottom-left under the TV picture.
NOTE: Various programs access the hardware in different ways. You may or may not need to
click the primary button for operations other than playing DVDs.
6Click Apply.
7Click Yes to keep the new settings.
8Click OK.
DVD video is visible only on the display that is set to primary. While the DVD is playing,
the DVD player window on your computer display is blank or (if the DVD player window is
set to full-screen mode) the entire computer display screen is blank.
3Y647bk0.book Page 78 Wednesday, April 2, 2003 3:24 PM