Adding and Replacing Parts 107
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the
inner metal tabs that secure the memo ry module.
6If you are replacing a memory module, remove the existing module.
NOTICE: Handle memory modules by their edges, and do not touch the co mponents on a
module.
aUse your fingertips to carefully spread apart the securing clips on each end of the
memory module connector until the module popsup.
bRemove the module from the connector.
NOTICE: If you need to install memo ry modules in two connectors, install a memory module in
the connector labeled "SLOT 1" bef ore you install a module in the other connector.
7Ground yourself and install the new memory module:
aAlign the notch in the module with the slot in the center of the connector.
bSlide the edge of the module firmly into the connector, and rotate the modul e
down until you feel a click. If you do not feel the click, remove the mod ule and
reinstall it.
8Replace the cover and screw.
NOTICE: If the memory module cover is difficult to clos e, remove the m odule
and reinstall it. Forcing the cover to close may damage your c omputer.
3Y647bk0.book Page 107 We dnesday, April 2, 2003 3:24 P M