Philips SCD609, SCD610 user manual Get started, Charge the parent unit

Page 11

4 Get started

Charge the parent unit

Note

Make sure your hands and the unit are dry when you insert and remove the rechargeable battery.

Do as follows to charge the parent unit before

unit indicates that the battery is low.

»

the video display and the battery on/

Note

If the battery is completely empty, the parent unit automatically switches off.

The batter Model No. is BL-5C, 1050mAh.

1To remove the battery door, slide to the right.

2Insert the rechargeable battery.

3Reattach the lid.

4Insert the plug into parent unit and put the adapter in a wall socket.

»The battery on/off light on the parent

»When the battery is fully charged, the battery light turns solid green.

Note

after a long time not being used, switch it off and let it charge continuously for at least 8 hours.

time, the operating time is less than 7 hours.The rechargeable battery only reaches its full capacity after you have charged and discharged it three times.

The battery gradually discharges, even when the parent unit is switched off.

12EN

Image 11

Contents Register your product and get support at Contents Congratulations on your purchase and welcome IntroductionPage That produce heat Important Safety InstructionsDispose of used batteries according to instructions Clean the parent unit and baby unit with a damp clothReplacement If you need to replace the adapters, use Use the supplied adapter to charge the parent unitThis Philips Avent appliance complies with all Compliance informationRadio interference Reorient or relocate the receiving antennaRecycling Parent unit OverviewBaby unit Charge the parent unit Get startedWall mount the baby unit Set up the baby unit14 EN Parent unit beeps from time to time Use your baby monitorOperating range To see your baby Press on the parent/baby unitVoice activation Adjust brightnessMenu Zoom & PanMenu option Description English French Change the languageSelect ADD CAM Loop all camerasReset Long period of time Guarantee and serviceWarranty Full two-year warrantyIncrease the volume Connect the unit to a powerSwitch on Power supply Supply Battery is empty Baby unit is switched off Switch on the baby unitDecrease the volume Battery light on the parentRecharge the battery Parent unit is running low Battery of the parent unitNight vision LED is still on Baby units light sensor BatteryUnclear in night vision Baby unit may be too Long Feet away from the babySCD610609