Philips SCD610, SCD609 Use the supplied adapter to charge the parent unit, Adult supervision

Page 6

Use the supplied adapter to charge the parent unit.

To prevent electric shock, do not open the housing of the baby unit or parent unit except for the battery compartments.

Make sure that your hands are dry when you insert or replace batteries (battery pack).

For the parent unit, use only the rechargeable battery pack supplied with the baby monitor. Charge the rechargeable battery pack as described in this user manual.

To avoid a risk of explosion, replace the battery with a correct type.

Dispose of used batteries according to instructions.

To prevent battery explosion or leakage, which can damage the baby monitor and cause burns and skin or eye irritation:

do not recharge non-rechargeable batteries,

insert batteries in the right direction (+/-),

remove batteries if you are not going to use the product for more than 30 days,

keep the battery away from excessive

To prevent the battery from heating up or releasing toxic materials, hydrogen, or oxygen, do not:

overcharge, short circuit, reverse charge, or mutilate batteries.

To handle damaged or leaked batteries, wear protective gloves to protect your skin.

Adult supervision

This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.

Never place the baby unit inside the baby bed or playpen.

To prevent overheating, do not cover the baby monitor with a towel, blanket, or any other items.

When your baby monitor uses a power outlet, make sure that you can easily access the power outlet.

For their safety, do not allow children to play with the baby monitor.

Cleaning and Maintenance

Do not immerse the parent unit or baby unit in water, and do not clean them under the tap.

Do not use cleaning spray or liquid cleaners.

Unplug the parent unit and baby unit if they are connected to a power outlet.

Clean the parent unit and baby unit with a damp cloth.

Clean the adapters with a dry cloth. This baby monitor has no other

userserviceable parts. Storage precautions

Use and store the baby monitor between 10°C (50°F) and 35°C (95°F). Keep the baby monitor out of direct sunlight.

Disposal

Dispose of batteries properly. Do not incinerate. Batteries may explode if overheated. Do not wrap in metal or aluminum foil.Wrap in newspaper before discarding.

It is suggested that you contact your local town or city to determine proper battery redemption site(s) in your area.

Please visit www.recycle.philips.com for additional information on a recycling center in your area.

Replacement

If you need to replace the adapters, use the

If you need to replace the battery, please contact the customer care center.

EN 7

Image 6
Contents Register your product and get support at Contents Introduction Congratulations on your purchase and welcomePage Important Safety Instructions That produce heatUse the supplied adapter to charge the parent unit Clean the parent unit and baby unit with a damp clothReplacement If you need to replace the adapters, use Dispose of used batteries according to instructionsReorient or relocate the receiving antenna Compliance informationRadio interference This Philips Avent appliance complies with allRecycling Overview Parent unitBaby unit Get started Charge the parent unitSet up the baby unit Wall mount the baby unit14 EN To see your baby Press on the parent/baby unit Use your baby monitorOperating range Parent unit beeps from time to timeZoom & Pan Adjust brightnessMenu Voice activationLoop all cameras Change the languageSelect ADD CAM Menu option Description English FrenchReset Full two-year warranty Guarantee and serviceWarranty Long period of timeBaby unit is switched off Switch on the baby unit Connect the unit to a powerSwitch on Power supply Supply Battery is empty Increase the volumeParent unit is running low Battery of the parent unit Battery light on the parentRecharge the battery Decrease the volumeLong Feet away from the baby BatteryUnclear in night vision Baby unit may be too Night vision LED is still on Baby units light sensorSCD610609