Philips SCD610, SCD609 user manual Change the language, Select ADD CAM, Loop all cameras

Page 16

Note

Only when a position is empty in the list, a new camera can be paired.

1Press menu button on the parent unit.

2Select [ADD/DEL CAM].

» The paired CAM list is displayed.

Note

A paired CAM cannot be paired again on another position when it is assigned to a position.

3Select [ADD CAM].

»An info screen will indicate that the parent unit is searching for the new camera.You are prompted to shortly press of the baby unit, with the baby unit being on.

4Short press of the baby unit, less than 1

second.

»

pairing process is successful.

Delete a camera

1From the paired CAM list, select the camera to be deleted.

»The dialog [DELETE CAM1 FROM LIST?] is displayed.

2Press

press to return.

For example, when "CAM1 DELETE" is highlighted and selected, CAM1 will be deleted. Select other cameras

When multiple CAMs are listed in the paired camera list, you may switch between different cameras.

1Press or to show the CAM

currently linked to the parent unit.

Note

When only one camera is in the paired list, the camera

and will not be

displayed.

2Press and to navigate this bar to select other CAMs in the list, i.e. parent unit tries to connect to camera.

»Camera icon will change to orange color when it has been selected.

Loop all cameras

Switch on the tab LOOP ALL cameras to check what is going on through all paired cameras.

Note

When VOICE ACTIVATION is active, the LOOP ALL function is not selectable.

When LOOP ALL is activated, will be in orange color.You will see the views of all cameras one by one. Other cameras not viewed will be displayed as the icon , or (without bracket) etc. It also indicates how many cameras you have been set up and which camera will be viewed next.

For example,

1From , the view stays at camera one for 20 seconds.

2From , the view stays at camera two for for 20 seconds.

3The view switches to another camera if there is any more camera paired.

Change the language

1Press menu button on the parent unit

2select [LANGUAGE] desired language.

Menu option

Description

GB

English

FR

French

EN 17

Page 15 Page 17
Image 16
Page 15 Page 17
Contents
Register your product and get support at Contents Introduction Congratulations on your purchase and welcomePage Important Safety Instructions That produce heatClean the parent unit and baby unit with a damp cloth Replacement If you need to replace the adapters, useUse the supplied adapter to charge the parent unit Dispose of used batteries according to instructionsCompliance information Radio interferenceReorient or relocate the receiving antenna This Philips Avent appliance complies with allRecycling Overview Parent unitBaby unit Get started Charge the parent unit Set up the baby unit Wall mount the baby unit14 EN Use your baby monitor Operating rangeTo see your baby Press on the parent/baby unit Parent unit beeps from time to timeAdjust brightness MenuZoom & Pan Voice activationChange the language Select ADD CAMLoop all cameras Menu option Description English FrenchReset Guarantee and service WarrantyFull two-year warranty Long period of timeConnect the unit to a power Switch on Power supply Supply Battery is emptyBaby unit is switched off Switch on the baby unit Increase the volumeBattery light on the parent Recharge the batteryParent unit is running low Battery of the parent unit Decrease the volumeBattery Unclear in night vision Baby unit may be tooLong Feet away from the baby Night vision LED is still on Baby units light sensorSCD610609
Top Page Image Contents