Chariot Carriers 51100452 manual Wheel Assembly Caddie and Cabriolet, Wheel Assembly Corsaire

Page 6

1.1Wheel Assembly (Caddie and Cabriolet)

IMPORTANT: To ensure the axle system is engaged properly, test by trying to pull the wheel outwards after installing. The wheel should be locked in its installed position. If not, do not use and take your carrier to your local dealer for servicing.

To insert wheel into axle, simply insert the clevis axle attached to the wheel into the end of the hollow axle. Once fully inserted, you should hear a "click" sound.

To release the wheel from the axle, there is a safety spring button which needs to be released located on the axle pointed towards the rear of the carrier. Pull this spring button towards the rear of the carrier and remove the wheel.

1.2 Wheel Assembly (Corsaire)

1.Depress the rubber cap on the wheel hub with your thumb and fully insert the clevis axle into the hollow axle. Once fully inserted and secured, you should hear a “click” sound. Important: To ensure the axle system is engaged properly, test by trying to pull the wheel outwards after installing. The wheel should be locked in its installed position. If not, do not use and take your carrier to your Chariot Dealer for servicing.

2.Repeat all steps for the other wheel.

1.3 Hitch Arm Assembly for Cabriolet

1.4 Hitch Arm Assembly for Caddie

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert the hitch arm by pressing the small but- ton and sliding the arm into the wheel arm attachment bracket. The large button should engage into the hole on the wheel arm attachment bracket.

Insert the securing pin down through the small rear hole in the wheel arm attachment bracket.

Insert hitch arm straight into the ‘left’ hitch arm attachment bracket.

When inserted properly the end cap on the hitch arm should be seen from the back of the hitch arm attachment bracket.

Insert safety snap pin up through the holes in BOTH the hitch arm attachment bracket and the hitch arm. Lock safety snap pin by securing the clip over the pin.

WARNING: Failure to lock safety pin could cause the carrier to separate from the bicycle resulting in serious injury or death.

5

Image 6 Contents
Classic Series Table of Contents Carrier MAINTENANCE, Care and Storage General WarningsAlways inspect all parts every time you use your carrier Safety Guidelines Chariot Carrier CTS Classic Series Assembly Erecting and Folding the CarrierWheel Assembly Caddie and Cabriolet Wheel Assembly CorsaireHigh Visibility Flag Assembly and Installation Weather Cover Features Child Placement and Seatbelts TWO Children CaddieONE Child Caddie TWO Children Cabriolet and Corsaire ONE Child Cabriolet and CorsaireGo to section TWO Children Cabrilet Parts List Caddie PartQuantity Parts List Cabriolet Parts List Corsaire Chariot CTS Conversion Kits AccessoriesChariot Accessories Partial Stroller Kit Stroller castersAssemblage FélicitationsTable DES Matières Listes des piècesDirectives DE Sécurité Entretien ET EntreposageMise EN Garde Générals Mise EN GardeAssemblage Pour déplier et replier la remorqueAssemblage des roués Corsaire Dispositif pour le bras à vélo pourCabriolet Dispositif pour le bras à vélo pour CaddieInstallation de la remorque sur la coupelle d’attelage Assemblage et installation du fanion de sécuritéToile de recouvrement UN Enfant CaddieDeux Enfants Cabriolet UN Enfant CabrioletSuspension uniquement pour le modèle Corsaire Liste DES Pièces Caddie PièceQuantité Liste DES Pièces Cabriolet Liste DES Pièces Corsaire Accessoires Trousse DE Transformation Chariot CTSLimited Lifetime WARRANTY/GARANTIE À VIE Limitée WARRANTY/GARANTIE
Related manuals
Manual 26 pages 33.78 Kb