Fluke 90100 manual Table of Contents

Table of Contents

Section 1: General Information		1-1
1.1	Introduction	1-1
1.2	Features	1-2
1.3	Before You Start - Safety Precautions	1-3
1.4	Safety Terms	1-3
1.5	Manual Addenda	1-3
1.6	Specifications	1-3
1.6.1	Model 35300A Detector	1-3
1.6.2	Model 35360A Tracker Display	1-5
1.6.3	Interface Cable – Detector To Display	1-6
1.7	Unpacking And Inspection	1-6

Section 2: Operation		2-1
2.1	Introduction	2-1
2.2	Rear Panel Familiarization	2-2
2.2.1	Powering The System	2-2
2.2.2	Detector Input	2-2
2.2.3	RS-232 Computer Interface	2-4
2.3	Positioning The Model 35300A Detector In The Beam	2-4
2.4	Operation Instructions	2-6
2.4.1	Front Panel Controls	2-6
2.4.2	Powering Up The Model 35360A Tracker Display	2-8
2.4.3	Powering Down The Model 35360A Tracker Display	2-8
2.4.4	Using The Test/Detector Button	2-8
2.4.5	Using The Units Select Button	2-9
2.4.6	Using The Air Density Button	2-10
2.4.7	Using The Gain Select Button	2-10
2.4.8	Using The Measure Select Button	2-11
2.4.8.1	Absolute Measurements	2-11
2.4.8.2	Percent-Of-Center Measurements	2-12
2.4.8.3	Underranging And Overranging Conditions	2-13
2.4.9	Battery And Bias Annunciators	2-13
2.4.10	Gain Setting Mode	2-14
2.4.10.1	Changing Front Panel Gain Factor’s From The Measurement	2-15
2.4.10.2	Saving the FPGF Changes	2-15
2.4.10.3	Aborting the FPGF Changes	2-15

i