Precor S3.25 manual Assemble the Cable and Pulleys

S3.25 Leg Press Option Assembly Instructions

6.Assemble the Cable and Pulleys

You can identify Cables by the white numbers placed at the end of the Cable.

A. Place Leg Press Option Cable 40538-103 between a

cable retainer and one 3½-inch pulley. Attach the

pulley to the Lower Pulley Bracket located at the

base of the Rear Upright using

one 2-inch bolt

two washers

one locknut

Wrench tighten.

B. From the Top Beam, remove the surgical tube and

its fasteners.

Note: Discard the fasteners

one 3¼-inch bolt

one one-inch barrel spacer

two washers

Rear Upright

Attach this end to the Cable Tree

Cable 40538-103

This end is

3½" Pulley attached to the Leg Press

1 - 2" bolt A 2 - washers

1 - locknut

one locknut

Cable Retainer

Lower Pulley Bracket

Surgical Tube

Note that no pulley is attached to this bolt hole

Discard

B 1 - 3¼" bolt 1 - 1" barrel spacer 2 - washers

1 - locknut

Surgical

Tube

Cable Tree

1 2 3 4 5 6

Step 6. Assemble the Cable and Pulleys

page 13