Precor S3.25 manual Remove the Shroud

Page 7

S3.25 Leg Press Option Assembly Instructions

1. Remove the Shroud

Important: For ease of assembly, the fasteners and hardware for each step are labeled and packaged in separate bags.

Note: If you are assembling the Leg Press Option along with your S3.25, go directly to Step 2.

Before you can attach the Leg Press Option to the unit, you must remove the Shroud.

A.Remove the Shroud by loosening and removing six 2¾-inch bolts

six washers six locknuts

B.Pull the Shroud away from the S3.25 and lay it and its fasteners on the floor in a secure place.

Note: The top of the Shroud has a notch in it to help you clear the Top Beam fastener.

Top Beam

Notch in Shroud fits around Top Beam fastener

6 - 2¾" bolts A 6 - washers 6 - locknuts

B Remove Shroud

1

2

3

4

5

6

Step 1. Remove the Shroud

page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents S3.25 Obtaining Service Important Safety InstructionsTable of Contents Before You Begin 1Before You BeginUnpacking the Equipment Preparations Installation RequirementsRequired Tools Assembly Instructions AssemblyInstructionsProfessional installers are highly recommended Remove the Shroud Attach the Cross Brace to the S3.25 Assemble the Frame Footrest Assemble the Seat Pads Route the Cable Assemble the Cable and Pulleys New Surgical Tube Replace the Shroud Stretch the Cable AdjustmentsRotate the Cam Washer Adjust the Rubber Bumper on the Leg Press Option Thank You and Welcome to Precor Gender Marital status Age Annual household income Date Product Serial Purchase NumberPurchased From Please indicate the type of product purchasedPrecor Residential Equipment Limited Warranty S3.25 Leg Press Option Specifications
Related manuals
Manual 22 pages 61.67 Kb Manual 20 pages 29.11 Kb
Top Page Image Contents