Precor S3.25 manual Assemble the Frame

S3.25 Leg Press Option Assembly Instructions

3. Assemble the Frame

A.With someone helping you, lift the Seat Frame upright. Have your assistant hold it in place while you attach the Cross Brace in the next step.

B.Attach the Cross Brace to the holes found at the front of the Seat Frame using

two 3-inch bolts four washers two locknuts Wrench tighten.

Important: A label on the Seat Frame indicates the mounting holes you must use to attach the Cross Brace to the S3.25 Leg Press Option.

C.Slide the Backpad Support into the Seat Frame, locking it in place with the Pop Pin.

Backpad

Support

Backpad

Support

Pop Pin

C

Have an assistant hold A the Seat Frame stable

and upright while you attach the Cross Brace

Seat Frame

Cross Brace
Label indicates mounting	2 - 3" bolts
	B 4 - washers
location for the S3.25
	2 - locknuts

1

2

3

4

5

6

Step 3. Assemble the Frame

page 9