Precor S3.25 manual Rotate the Cam Washer

Page 17

S3.25 Leg Press Option Assembly Instructions

2. Rotate the Cam Washer

If the Top Cap Weight does not rest on the Top Weight, you must make further adjustments.

A.Remove excess tension from the Cable by placing the Weight Pin into the Selector Stem just under the Top Cap Weight.

B.To tighten or loosen the Cable tension, rotate the Cam Washer.

C.Look to see that Top Cap Weight rests squarely on the Weight Stack. If it does, no more adjustments are needed and the Leg Press Option is ready to use. If the Top Cap Weight does not rest on the Top Weight, then further adjustments are needed. Continue with step 3.

 

 

A

 

 

 

 

 

Top Cap

 

 

 

 

 

Weight

 

 

 

 

 

Top Weight

 

 

 

 

 

Weight Pin

 

 

Rotate the

 

 

 

 

 

B Cam Washer

 

 

 

 

C

 

 

 

Top Cap

 

 

 

 

 

Weight

 

 

 

1

2

3

4

5

6

Step 2. Rotate the Cam Washer

page 17

Image 17
Contents S3.25 Obtaining Service Important Safety InstructionsTable of Contents Unpacking the Equipment 1Before You BeginBefore You Begin Required Tools Installation RequirementsPreparations Professional installers are highly recommended AssemblyInstructionsAssembly Instructions Remove the Shroud Attach the Cross Brace to the S3.25 Assemble the Frame Footrest Assemble the Seat Pads Route the Cable Assemble the Cable and Pulleys New Surgical Tube Replace the Shroud Stretch the Cable AdjustmentsRotate the Cam Washer Adjust the Rubber Bumper on the Leg Press Option Thank You and Welcome to Precor Purchased From Date Product Serial Purchase NumberPlease indicate the type of product purchased Gender Marital status Age Annual household incomePrecor Residential Equipment Limited Warranty S3.25 Leg Press Option Specifications
Related manuals
Manual 22 pages 61.67 Kb Manual 20 pages 29.11 Kb