Precor manual Attach the Cross Brace to the S3.25

Page 8

S3.25 Leg Press Option Assembly Instructions

2.Attach the Cross Brace to the S3.25

Note: If you are assembling the Leg Press Option along with the S3.25, you should complete Step 10 in the S3.25 Assembly and Maintenance Guide before attaching the Cross Brace.

A. Align the Cross Brace to the S3.25 Rear Upright

 

and secure it using

 

two 3-inch bolts

 

four washers

 

two locknuts

 

Wrench tighten.

 

2 - 3" bolts

Cross Brace

A 4 - washers

 

2 - locknuts

 

1 2 3 4 5 6

Step 2. Attach the Cross Brace to the S3.25

page 8

Image 8
Contents S3.25 Important Safety Instructions Obtaining ServiceTable of Contents Unpacking the Equipment 1Before You BeginBefore You Begin Required Tools Installation RequirementsPreparations Professional installers are highly recommended AssemblyInstructionsAssembly Instructions Remove the Shroud Attach the Cross Brace to the S3.25 Assemble the Frame Footrest Assemble the Seat Pads Route the Cable Assemble the Cable and Pulleys New Surgical Tube Replace the Shroud Adjustments Stretch the CableRotate the Cam Washer Adjust the Rubber Bumper on the Leg Press Option Thank You and Welcome to Precor Date Product Serial Purchase Number Purchased FromPlease indicate the type of product purchased Gender Marital status Age Annual household incomePrecor Residential Equipment Limited Warranty S3.25 Leg Press Option Specifications
Related manuals
Manual 22 pages 61.67 Kb Manual 20 pages 29.11 Kb