Dorel Eng. 4358-5936 manual Belt-Positioning Booster Use, Removal of Harness

Page 16

1 year of age.

Belt-Positioning Booster Use

Refer to the “Choosing Restraint and Position” section to make sure your child is at the

Removal of Harness

Harness must be removed for use as a Belt-Positioning Booster.

Belt-Positioning

43-52” (110.1-132.1 cm), Over

proper weight and height to use the belt- positioning booster.

Lap/Shoulder Belt

1

From the back of the seat, unfasten harness from splitter plate.

Booster Use: 40-80 lbs. (18.

Belt-Positioning Booster Use: 40-80 lbs. (18.1-36.3 kg),

Do not use LATCH or tether strap when using the Belt-Positioning Booster.

You MUST fasten the LATCH belt hooks together behind seat.

When your child is over 40 lbs. (18.1 kg) or 43” (110.1 cm) and over 1 year old, you must remove the harness and use this child restraint as a belt- positioning booster.

!WARNING

Loose LATCH hooks can result in serious injury or death.

2

Pull harness adjustment

strap as far out as

 

 

possible.

3

Pull harness through the

slots from the front.

 

Unthread harness from the harness retainer.

Unthread harness from the buckle plates.

Pull harness out of shell.

1-36.3 kg), 43-52” (110.1-132.1 cm), Over 1 year of age.

28

29

continued on next page.

Image 16
Contents Commuter/Ventura High Back Booster Table of Contents Before You BeginPage Aircraft Installation General and Warm Weather UseUnderstanding Your Vehicle Anchor Bracket Air BagLatch Anchors Seat BightChild Restraint Parts Front BackChoosing Restraint and Position Preparing Child Restraint to Fit Your ChildMake sure Latch belt Child restraint shellInstall Cup Holder on select models Check Harness HeightFront To change harness locationSecuring Your Child in the Child Restraint Down on the harness Out on the harnessPress red button on Buckle to releaseVehicle belt too short Knowing Your Vehicle BeltsManual Belts 43 85.1-110 cm, Over 1 year of age Forward-Facing Use Forward-Facing InstallationYear of age Forward-Facing Installation with Vehicle Belts Age Storage of Top Anchorage Strap Adjusting the Top Anchorage StrapTo Attach Top Anchorage Strap Belt-Positioning Booster Use Removal of HarnessBelt-Positioning Booster Installation Reinstall Harness Stops against the shellRemoving Seat Pad for Cleaning Remove harness asPositioning Booster Straps shown in redLocking Clip Remove the 6 harnessOut from the front side With the otherTrouble Shooting Warranty Replacement Parts Order Form