Dorel Eng. 4358-5936 Choosing Restraint and Position, Preparing Child Restraint to Fit Your Child

Page 7

Choosing Restraint and Position

Your child’s height, weight and age determine how your child restraint should be placed in the vehicle and which restraint should be used.

22-40 lbs. (10.1-18 kg)

34-43 in. (85.1-110 cm) and Over 1 Year Old

Forward-Facing using 5-point harness

Preparing Child Restraint to Fit Your Child

You MUST make these adjustments with your child before you install the child restraint in the vehicle.

1

Make sure LATCH belt

packaging is pulled free of

 

child restraint shell.

Child and child restraint face the front of the vehicle and are placed in the back seat.

40-80 lbs. (18.1-36.3 kg)

43-52 in. (110.1-132.1 cm) and Over 1 Year Old

Belt-Positioning Booster using vehicle lap/shoulder belt combination

Child and child restraint face the front of the vehicle and are placed in the back seat.

5-point harness is removed.

2

3

4

Loosen harness by pushing down on the harness release lever (under flap on the front of child restraint) while pulling out on the harness.

Press on harness retainer release button and pull apart.

Press red button on buckle to release the buckle plates. Place harness over sides of child restraint.

10

11continued on next page.

Image 7
Contents Commuter/Ventura High Back Booster Before You Begin Table of ContentsPage General and Warm Weather Use Aircraft InstallationSeat Bight Understanding Your VehicleAnchor Bracket Air Bag Latch AnchorsFront Back Child Restraint PartsChild restraint shell Choosing Restraint and PositionPreparing Child Restraint to Fit Your Child Make sure Latch beltTo change harness location Install Cup Holder on select modelsCheck Harness Height FrontSecuring Your Child in the Child Restraint Buckle to release Down on the harnessOut on the harness Press red button onVehicle belt too short Knowing Your Vehicle BeltsManual Belts 43 85.1-110 cm, Over 1 year of age Forward-Facing Use Forward-Facing InstallationYear of age Forward-Facing Installation with Vehicle Belts Age Storage of Top Anchorage Strap Adjusting the Top Anchorage StrapTo Attach Top Anchorage Strap Removal of Harness Belt-Positioning Booster UseBelt-Positioning Booster Installation Stops against the shell Reinstall HarnessStraps shown in red Removing Seat Pad for CleaningRemove harness as Positioning BoosterWith the other Locking ClipRemove the 6 harness Out from the front sideTrouble Shooting Replacement Parts Order Form Warranty