Dorel Eng. 4358-5936 manual Reinstall Harness, Stops against the shell

Page 18

3

Secure the shoulder

belt through one of the

 

notches in the shoulder

Reinstall Harness

belt guide. The belt

should cross the base

of the child’s neck and

across the chest (not the

face or neck). Pull up

on the shoulder belt to

tighten.

Check periodically to

ensure your child has not

moved out of position

and loosened the

shoulder belt.

!WARNING

Check vehicle instructions for more information about air bag/child restraint use.

Do Not Use only the lap belt when using this seat as a belt-positioning

1

2

From the front of child restraint push buckle’s metal plate through pad and shell. Make sure buckle faces out.

From underneath, pull buckle’s metal clip through pad and shell.

booster without the internal harness.

The shoulder belt must always be adjusted snugly across the child’s chest.

NEVER place the shoulder belt under the child’s arms.

Failure to follow these

warnings can result in serious injury or death to your child.

3

Pull up on buckle to make

sure buckle’s metal plate

 

 

stops against the shell.

!WARNING

Failure to place buckle’s metal plate completely through pad and shell can result in serious injury or death to the child.

32

33

continued on next page.

Image 18
Contents Commuter/Ventura High Back Booster Table of Contents Before You BeginPage Aircraft Installation General and Warm Weather UseLatch Anchors Understanding Your VehicleAnchor Bracket Air Bag Seat BightChild Restraint Parts Front BackMake sure Latch belt Choosing Restraint and PositionPreparing Child Restraint to Fit Your Child Child restraint shellFront Install Cup Holder on select modelsCheck Harness Height To change harness locationSecuring Your Child in the Child Restraint Press red button on Down on the harnessOut on the harness Buckle to releaseKnowing Your Vehicle Belts Vehicle belt too shortManual Belts Forward-Facing Use Forward-Facing Installation 43 85.1-110 cm, Over 1 year of ageYear of age Forward-Facing Installation with Vehicle Belts Age Adjusting the Top Anchorage Strap Storage of Top Anchorage StrapTo Attach Top Anchorage Strap Belt-Positioning Booster Use Removal of HarnessBelt-Positioning Booster Installation Reinstall Harness Stops against the shellPositioning Booster Removing Seat Pad for CleaningRemove harness as Straps shown in redOut from the front side Locking ClipRemove the 6 harness With the otherTrouble Shooting Warranty Replacement Parts Order Form