Care and Maintenance
Cleaning the Cover
•HAND WASH the cover using cold water and mild soap.
•LINE DRY to prevent the cover from shrinking.
•DO NOT:
*Bleach
*Machine wash
*Machine dry
*Iron
Cleaning the Harness
•SPONGE CLEAN the harness using warm water and mild soap.
•TOWEL DRY
•DO NOT:
*Disassemble the harness
*Bleach
*Machine wash
*Machine dry
*Iron
Cleaning the Shell
•SPONGE CLEAN the shell using warm water and mild soap.
•TOWEL DRY
•DO NOT use abrasive cleaners
Cleaning the Side Impact Cushions
•SPONGE CLEAN the cushion using warm water and mild soap.
•TOWEL DRY
•DO NOT use abrasive cleaners
Warning: Prevent the Side Impact Cushions from being punctured. Puncture damage will cause the cushions not to perform as intended.
Replacing the Cover
1Fit the cover around the head restraint.
*Be careful not to damage the
Care and Maintenance
3Fit the bottom of the cover over the lower part of the child
seat shell, then pull the elastic loops over the hook on the bottom of the child seat shell.
4Push the cover under the lower belt guides.
5 Pull the head restraint cover over the head restraint shell, and reattach the elastic bands.
* Be careful not to damage the
6 Move the harness adjuster to the highest position (a), then move the head restraint to the lowest position (b).
* Ensure that harness slots in the cover, head restraint and harness adjuster are aligned.
7Replace the screw to lock the head restraint adjuster.
8Pull the buckle through the slot in the cover.
2 Pull the cover fabric tight and slide it between the child seat shell and Side Impact Cushion.
2
* Ensure that the buckle is through the correct cover slot for the buckle position.
44 | 45 |