Fastening the Buckle Releasing the Buckle

Child Seat Functions

Fastening the Buckle

Releasing the Buckle

Child Seat Functions

3Booster Position

Positioning

Block

Insert one tongue at a time into the buckle.

NOTE: Proper connection is confirmed with an audible click after inserting each buckle tongue.

Using the Chest Clip

Press the release button and pull the tongues from the buckle.

NOTE: Periodically clean the buckle to ensure proper operation. See Page 46.

Using Lower Anchors and Tethers for Children (LATCH)

LATCH SYSTEM ANCHOR LOCATIONS

1 Squeeze to	2 Push together to fasten
open	NOTE: Always position the chest clip at
	armpit level.

Using the Positioning Block

NOTE: Set the positioning block position BEFORE installing.

1Unhook the Versa-Tether from the storage clip

2Harness Position

Positioning

Block

Tether	Lower LATCH
Anchor	Anchors

The figure above shows typical locations for lower anchors and tether anchors in a vehicle. Check your vehicle owner’s manual for the exact LATCH anchor locations and seating positions

(if equipped), information on use with a child seat, and for the maximum weight rating for the LATCH anchors.

Standard vehicle seat spacing between LATCH anchors is 11 inches (27.9 cm). This child seat can be used in a seating position with up to 20 inches (50.8 cm) of space between the LATCH anchors if the vehicle manufacturer allows.