TO IPLAY A DVD RECORDED IN DOLBY DIGITAL SURROUND
RECORDING AN AUDIO SC)(JRCE
This rf?ceiver has the 5.1 INPUT connectors supporting Dolby Digital decoder with the 5.1 ch output terminals. When a DVD player that contains a Dolby Digital decoder is connected to the receiver, you can enjoy
f Turn the FUNCTION selector to select the VIDEO
l/DVD/MD function.
2 Press the VIDEO 1/5.1CH/BAND button.
“5.1ch IN” appears on the display and the DVD player connected to the 5.1 INPUT terminals is selected as a source.
3Start playing the DVD recorded in Dolby Digital Su[rround.
m3
●The 5.1 CH function is automatically canceled and the VIDEO 1, DVD or MD function is selected:
-when the Dolby Pro Logic is turned on
-when headphones are plugged in
●‘The 5.1 CH function cannot be selected while headphones are plugged in.
TAPE MONITOR MULTIJOG
1 Select the prograrm source to be reccwded, Turn the FUNCTION selector.
2Set the tape deck or MD recorder to the recording mode.
3Start the selected program source.
To monitor recorded sound during recording (when tlhe connectedtape deck is e
Press the TAPE MONITOF{ button. “TAPEON” appears on the display for four seconds, and then the source name selected in step 1 comes back on. To cancel the tape monitor, press it again so that “TAPEOFF appears.
●Any sound control system has no effect on recording (see page
8).
=Input sound through the 5.1 INPUT terminals cannot Ibe recorded. When recording the sound from the DVD player, connect the AUDIO OUT (IDOWN MIXING) terminals of the DVD player to the VIDEO l/DVD/MDAUDIO IN terminals of tlhe unit.
●When recording audio sources by the MD recorder connected to the VIDEO 1/DVD/MD AUDIO OUT terminals, the selected video source (see page 11) should be V2 or V3. Recording cannot be done while the VI (VIDEO 1) is select(?d and displayed on the window.
●Input sound from the tape deck connected to the TAF)E MONITOR IN terminals cannot be recorded.