Aiwa AV-D35 manual Setting the Clock, Setting the Sleep Timer

Page 18

SETTING THE CLOCK

CLOCK

213

1

VIDEO 1/5:1CH/BAND

When the AC cord is connected for the first time, the clock on the display flashes.

Set the time as follows while the power is off.

1 Press the ENTER button.

The display becomes a little brighter

2 Turn the MULTI JOG to designate the hour and the minute.

The time advances by turning it to right, and decreases by turning it to left.

3 Press the ENTER button. The clock starts from 00 second.

m

When the clock is set for the first time after purchase

Everything on the display will clear.

This is because the power economizing mode of the unit is activated, and is not a malfunction.

The power economizing mode can be canceled. See page 6 for details.

To correct the current time

Press the POWER button to turn the unit off. Press the ENTER button and carry out steps 1 to 5 above.

To display the current time

Press the CLOCK button on the remote control. The clock is displayed for 4 seconds.

To switch to the 24-hour standard

Press the VIDEO 1/5.1 CH/BAND button while the current time is displayed.

Repeat the same procedure to restore the 12-hour standard.

If the clock display flashes while the power is off

This is caused by a power interruption. The current time needs to be reset.

If power is interrupted for more than approximately 24 hours, all settings stored in memory after purchase need to be reset.

SETTING THE SLEEP TIMER

The receiver can be automatically turned off at a specified time.

Use the remote control.

1 Press the SLEEP button.

2 Press the UP or DOWN button within four seconds to specify the time until the power is turned off.

Each time the button is pressed, the time changes between 5 and 240 minutes in 5-minute steps.

Specified time

The time can also be selected by the MULTI JOG on the main unit.

To check the time remaining until the power is turned off

Press the SLEEP button once. The remaining time is displayed for four seconds.

To cancel the sleep timer

Press the SLEEP button twice so that “SLEEPoFF on the display appears.

17 ENGLISH

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Ml ml Electric Power PrecautionsInstallation AC power cordTable of Contents Connections Connecting EquipmentBefore connecting the AC cord CamcorderSpeaker terminals Connecting Speakers @Connecting + to +, to terminals Speaker impedanceConnecting the Supplied Antennas @ Connecting AN Outdoor AntennaPositioning the Speakers Aboijttheremote Control Power Economizing ECO MoidePress the Power button Before OperationTo adjust the Ieft/right balance of the front speakers Custom Audio AdjustmentSound Adjustment During Recording Vowme ControlSetting NEW Equalization Curves Electronic Graphic EiualizerWithin 8 seconds, press the Enter button Dspsurround When the music source is monauralTo adjust the volume and balance of the! surroumd speakers DSP DSP Multijogmanual Select DOWN,UPAbout the video source to the monitor orTV To adjust the sound level of the connected sourceSelection of AUDIO/VIDEO Source To select the video sourceSelect the program source to be recolrded To Play a DVD Recorded in Dolby Digital SurroundSurround 1ENTER Tape Mcnitor MultijogTo change the AM tuning interval Manual TuningWhen an FM stereo broadcast contains noise Press the UP or Down button to select a stationPresetting Stations Preset Number TuningCheck the following To Select a Dolby PRO Logic ModeSelecting Dolby PRO Logic ModeDoilby PRO Logic Phantom mode Adjusting Speaker Level BalanceDolby PRO Logic Normal or Wide mode +====7 Stereo Normal or Wide modeSetting the Clock Setting the Sleep TimerTurn the Multi JOG to designate the hour and the minute FM tuner’ section AM tuner sectionAmplifier section General Troubleshooting GuideGeneral Tuner SectionParts Index Eneraia electrica PrecaucionesInstalacion Anotacion del propletarioAntena exterior ManltenimientoDaFios que requieren reparation Antes de conectar et cable de alimentacion de CA ConexionesConexion DE Equipos OUTSurround Speakers Coniexion DE LOS Altavoces @Terminates para altavoces Impedtmcia de Ios altavocesUbicacion DE LOS Altavoces Conexion DE LAS Antenas Suministradas @Conexion DE UNA Antena Exterior SOB13E EL Controlador Remoto Modo DE Ahorro DE ENERGhl, ECOPresione el boton Power Antes DE LA OperacionSeleccion del sistema de altavoces delanteros Sistema Sijper T-BASS Control DEL VolumenAwste DEL Sonido a SU Gusto Ajuste Deil Sonido Durante LA GrabacionEcualizador Grafico Electronic Ajuste DE Nuevas Curvas DE EcualizacionDentro de 8 segundos, presione el boton Enter Sonido Perimetrico DEL Procesador DE Senal Digital Cuando la fuente de musics sea monoauralPara seleccionar con et controlador remotol Para seleccionar la fuente de video Seleccion DE UNA Fuente DESobre la fuente de vfdeo para el monitor o el televisor Para ajustar el nivel del sonido de la fuente conectadaSelections! la fuente de programaa que desee grabar Grabacion DE UNA Fuente DE AudioPresione el boton VIDEO1/5.l CH/BAND VIDEOI, DVD O MDPara cambiar Ios intervals de sintonizacion de AM Sintonizacion ManualPresione el boton UP o Down para seleccionar una emisora Para buscar una emisora rapidamente Btisqueda automaticRepita 10s pasos 1 y Memorization DE EmisorasSintonizacionde Numeros Memorizados Al utilizar el ccrntrolador remotoModo recomendado Seleccion DE Dolby PRO LogicPara Seleccionar UN Modo Dolby PRO Logic PRO LOGIC+ Phantom + 3 StereoMotto Dolby PRO Logic Normal O Wide Ajuste DEL Equilibria DEL Nivel Entre AltavocesModo 3 Stereo Normal O Wide Modo Dolby PRO Logic PhantomPuesta EN Hora DEL Reloj Clock Video 1/5.1CH/BANDPara corregir la hors actual Seccion del sintonizador de FM Cuidados Y MantenimientoEspecificaciones Seccion del sintonizador de AMSeccion General GUA Para LA Solucion DE ProblemasGenerales Seccion DEL SintonizadorFront Speakers A, B GEQ Manjal Select Test Muting Phones Phono PowerDSP Mono Tuner Multi JOGElectricity Releve du proprietaireEntretien DES MatieresJenne exterieure Wmrnages exigeant I’intervention d’un jgwOJessionnelRaccordements Raccordement Detout ’EQUIPEMENT‘RONT Raccordement DES Enceintes @ Raccordement des bornes + a + et aPositionnement DES Enceintes Raccordement DES Antennes Fournies @Raccordement D’UNE Antenne Exterieure Apropos DE Latelecommande Mode D’ECONOMIE D’ENERGIE EcioAppuyez sur la touche Power Avant DE CommencerSelection de la paire d’enceintes avant Systeme Super T-BASS Reglage DE VolumeEglage Personnel DU SON Reglage DU Soin Pendant ’ENREGISTREMENTEgaliseur Graphique Electronique Pour selectionner ie mode avec la telecommandePour annuler Ie mode selectionne Reglage DE Nouvelles Courbes D’EGALISATIONPour ajuster k volume et la balance des enceintes surround Pour annuler Ie mode s61ectionnePour selectionner Ie mode avec la tt51ecomnnande Prcesseur D’AMBIANCEPour changer Ie nom affiche pour la Video 1 et la Video Selection D’UNE Source Audio OU VideoPour selectionner la source video Propos de la source video fournie au moniteur ou televiseurEnregistrement D’UNE Source Audio 1ENTER Tape Monitor MultijogTournez Ie selecteur Function pour Pour changer I’intervalle d’accord AhQuand une emission stereo FM est parasitee Accord D’UN Numero Pireregle Avec la telecommandePrereglage DES Stations Fiepetez Ies etapes 1 etSelection DU Dolby PRO Logic Pour Selectionner UN Mode Dolby PRO LogicMode conseille ~ PRO Logic +PHANTOM -3 STEREO~Mode 3 Stereo Normal ou Wide Selectionnez Ie mode Dolby Pro Logic en fonctionMode Dolby PRO Logic Normal ou Wide Nivieau DES EnceintesAppuyez sur la touche SET REGLAGEDEL’HORLOGE3EGLAGE DE LA Iviinuterie ’ARRET Tournez Multi JOG pour designer I’heure et Ies minutesSoin ET Entretien Section TunerSection Amplificateur Generalities Guide DE DepannageGeneralities Section TunerIndiex DES Composants Page

AV-D35 specifications

The Aiwa AV-D35 is a versatile and robust audio-video receiver that has earned a reputation for delivering high-quality sound and performance in home entertainment systems. With its blend of features, technologies, and user-friendly design, the AV-D35 appeals to both audiophiles and casual users alike.

One of the standout features of the Aiwa AV-D35 is its powerful sound output, which comes from its built-in amplifier capable of delivering 100 watts per channel. This ensures a dynamic audio experience, whether it’s deep bass for movies or crisp highs for music. The receiver supports a wide range of audio formats, including Dolby Digital and DTS, making it an excellent choice for home theater setups.

The AV-D35 also employs advanced digital signal processing technology, which helps to enhance audio clarity and detail. This technology allows users to customize their listening experience through various sound modes, catering to different types of media, from movies to music and gaming. Additionally, the built-in equalizer provides users with the ability to fine-tune their sound settings according to personal preferences.

Connectivity is another strong point for the Aiwa AV-D35. It is equipped with multiple inputs, including HDMI, optical, and coaxial connections, enabling seamless integration with a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also features dual-zone audio capabilities, allowing users to enjoy different audio sources in separate rooms.

The AV-D35 is designed with user convenience in mind. It comes with a thoughtfully laid out remote control that allows for easy navigation through the various features and settings. The front panel is intuitive, with clearly labeled buttons and a bright display that provides real-time information about the current audio or video source.

Another innovative characteristic of the Aiwa AV-D35 is its compact design, which allows it to fit easily into a home entertainment setup without taking up too much space. The sleek aesthetic complements modern living rooms, making it an attractive addition to any home.

In conclusion, the Aiwa AV-D35 stands out as a feature-rich audio-video receiver that offers a perfect combination of sound quality, connectivity options, and user-friendly design. Whether used for an immersive home theater experience or as a part of a high-quality audio system, the AV-D35 delivers reliable performance and versatility.
Top Page Image Contents