Aiwa AV-D35 manual Custom Audio Adjustment, Vowme Control, Sound Adjustment During Recording

Page 9

CUSTOM AUDIO ADJUSTMENT

VOL

VOWME CONTROL

Turn the VOLUME control on the unit, or press the VOL buttons on the remote control.

The volume level is shown on the display for four seconds. It can be adjusted between Oand MAX (50). It flashes when being set over the level 44.

The volume level remains memorized even after the power is turned off. However, if the power is turned off when the volume is set to more than 21, it is automatically set to 20 the next time the power is turned on.

To adjust the Ieft/right balance of the front speakers

Press the BALANCE button to display “L/R OdB. Then press the DOWN or UP button repeatedly within four seconds.

Note that the front speakers balance of the 5.1 CH and Dolby Pro Logic modes is also changed,

To mute the sound temporarily

Press the MUTING button (–20 dB).

‘(MUTE ON” appears on the display for four seconds. While muting the sound, the selected function indicator flashes. Press the MUTING button again to restore the sound.

(cancel)

m

Low-frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low-frequency sound is originally emphasized. In this case, cancel the T-BASS system.

SOUND ADJUSTMENT DURING RECORDING

The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording.

ENGL.ISH 8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Ml ml Installation PrecautionsElectric Power AC power cordTable of Contents Before connecting the AC cord Connecting EquipmentConnections CamcorderConnecting + to +, to terminals Connecting Speakers @Speaker terminals Speaker impedanceConnecting the Supplied Antennas @ Connecting AN Outdoor AntennaPositioning the Speakers Power Economizing ECO Moide Aboijttheremote ControlBefore Operation Press the Power buttonSound Adjustment During Recording Custom Audio AdjustmentTo adjust the Ieft/right balance of the front speakers Vowme ControlSetting NEW Equalization Curves Electronic Graphic EiualizerWithin 8 seconds, press the Enter button To adjust the volume and balance of the! surroumd speakers When the music source is monauralDspsurround DSP DSP Multijogmanual Select DOWN,UPSelection of AUDIO/VIDEO Source To adjust the sound level of the connected sourceAbout the video source to the monitor orTV To select the video sourceSurround To Play a DVD Recorded in Dolby Digital SurroundSelect the program source to be recolrded 1ENTER Tape Mcnitor MultijogWhen an FM stereo broadcast contains noise Manual TuningTo change the AM tuning interval Press the UP or Down button to select a stationPreset Number Tuning Presetting StationsSelecting Dolby PRO Logic To Select a Dolby PRO Logic ModeCheck the following ModeDolby PRO Logic Normal or Wide mode +====7 Adjusting Speaker Level BalanceDoilby PRO Logic Phantom mode Stereo Normal or Wide modeSetting the Clock Setting the Sleep TimerTurn the Multi JOG to designate the hour and the minute FM tuner’ section AM tuner sectionAmplifier section General Troubleshooting GuideGeneral Tuner SectionParts Index Instalacion PrecaucionesEneraia electrica Anotacion del propletarioAntena exterior ManltenimientoDaFios que requieren reparation Conexion DE Equipos ConexionesAntes de conectar et cable de alimentacion de CA OUTTerminates para altavoces Coniexion DE LOS Altavoces @Surround Speakers Impedtmcia de Ios altavocesUbicacion DE LOS Altavoces Conexion DE LAS Antenas Suministradas @Conexion DE UNA Antena Exterior Modo DE Ahorro DE ENERGhl, ECO SOB13E EL Controlador RemotoPresione el boton Power Antes DE LA OperacionSeleccion del sistema de altavoces delanteros Awste DEL Sonido a SU Gusto Control DEL VolumenSistema Sijper T-BASS Ajuste Deil Sonido Durante LA GrabacionEcualizador Grafico Electronic Ajuste DE Nuevas Curvas DE EcualizacionDentro de 8 segundos, presione el boton Enter Sonido Perimetrico DEL Procesador DE Senal Digital Cuando la fuente de musics sea monoauralPara seleccionar con et controlador remotol Sobre la fuente de vfdeo para el monitor o el televisor Seleccion DE UNA Fuente DEPara seleccionar la fuente de video Para ajustar el nivel del sonido de la fuente conectadaPresione el boton VIDEO1/5.l CH/BAND Grabacion DE UNA Fuente DE AudioSelections! la fuente de programaa que desee grabar VIDEOI, DVD O MDPresione el boton UP o Down para seleccionar una emisora Sintonizacion ManualPara cambiar Ios intervals de sintonizacion de AM Para buscar una emisora rapidamente Btisqueda automaticSintonizacionde Numeros Memorizados Memorization DE EmisorasRepita 10s pasos 1 y Al utilizar el ccrntrolador remotoPara Seleccionar UN Modo Dolby PRO Logic Seleccion DE Dolby PRO LogicModo recomendado PRO LOGIC+ Phantom + 3 StereoModo 3 Stereo Normal O Wide Ajuste DEL Equilibria DEL Nivel Entre AltavocesMotto Dolby PRO Logic Normal O Wide Modo Dolby PRO Logic PhantomPuesta EN Hora DEL Reloj Clock Video 1/5.1CH/BANDPara corregir la hors actual Especificaciones Cuidados Y MantenimientoSeccion del sintonizador de FM Seccion del sintonizador de AMGenerales GUA Para LA Solucion DE ProblemasSeccion General Seccion DEL SintonizadorDSP Muting Phones Phono PowerFront Speakers A, B GEQ Manjal Select Test Mono Tuner Multi JOGReleve du proprietaire ElectricityJenne exterieure DES MatieresEntretien Wmrnages exigeant I’intervention d’un jgwOJessionnelRaccordements Raccordement Detout ’EQUIPEMENT‘RONT Raccordement des bornes + a + et a Raccordement DES Enceintes @Positionnement DES Enceintes Raccordement DES Antennes Fournies @Raccordement D’UNE Antenne Exterieure Mode D’ECONOMIE D’ENERGIE Ecio Apropos DE LatelecommandeAppuyez sur la touche Power Avant DE CommencerSelection de la paire d’enceintes avant Eglage Personnel DU SON Reglage DE VolumeSysteme Super T-BASS Reglage DU Soin Pendant ’ENREGISTREMENTPour annuler Ie mode selectionne Pour selectionner ie mode avec la telecommandeEgaliseur Graphique Electronique Reglage DE Nouvelles Courbes D’EGALISATIONPour selectionner Ie mode avec la tt51ecomnnande Pour annuler Ie mode s61ectionnePour ajuster k volume et la balance des enceintes surround Prcesseur D’AMBIANCEPour selectionner la source video Selection D’UNE Source Audio OU VideoPour changer Ie nom affiche pour la Video 1 et la Video Propos de la source video fournie au moniteur ou televiseur1ENTER Tape Monitor Multijog Enregistrement D’UNE Source AudioTournez Ie selecteur Function pour Pour changer I’intervalle d’accord AhQuand une emission stereo FM est parasitee Prereglage DES Stations Avec la telecommandeAccord D’UN Numero Pireregle Fiepetez Ies etapes 1 etMode conseille Pour Selectionner UN Mode Dolby PRO LogicSelection DU Dolby PRO Logic ~ PRO Logic +PHANTOM -3 STEREO~Mode Dolby PRO Logic Normal ou Wide Selectionnez Ie mode Dolby Pro Logic en fonctionMode 3 Stereo Normal ou Wide Nivieau DES Enceintes3EGLAGE DE LA Iviinuterie ’ARRET REGLAGEDEL’HORLOGEAppuyez sur la touche SET Tournez Multi JOG pour designer I’heure et Ies minutesSoin ET Entretien Section TunerSection Amplificateur Generalities Guide DE DepannageGeneralities Section TunerIndiex DES Composants Page

AV-D35 specifications

The Aiwa AV-D35 is a versatile and robust audio-video receiver that has earned a reputation for delivering high-quality sound and performance in home entertainment systems. With its blend of features, technologies, and user-friendly design, the AV-D35 appeals to both audiophiles and casual users alike.

One of the standout features of the Aiwa AV-D35 is its powerful sound output, which comes from its built-in amplifier capable of delivering 100 watts per channel. This ensures a dynamic audio experience, whether it’s deep bass for movies or crisp highs for music. The receiver supports a wide range of audio formats, including Dolby Digital and DTS, making it an excellent choice for home theater setups.

The AV-D35 also employs advanced digital signal processing technology, which helps to enhance audio clarity and detail. This technology allows users to customize their listening experience through various sound modes, catering to different types of media, from movies to music and gaming. Additionally, the built-in equalizer provides users with the ability to fine-tune their sound settings according to personal preferences.

Connectivity is another strong point for the Aiwa AV-D35. It is equipped with multiple inputs, including HDMI, optical, and coaxial connections, enabling seamless integration with a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also features dual-zone audio capabilities, allowing users to enjoy different audio sources in separate rooms.

The AV-D35 is designed with user convenience in mind. It comes with a thoughtfully laid out remote control that allows for easy navigation through the various features and settings. The front panel is intuitive, with clearly labeled buttons and a bright display that provides real-time information about the current audio or video source.

Another innovative characteristic of the Aiwa AV-D35 is its compact design, which allows it to fit easily into a home entertainment setup without taking up too much space. The sleek aesthetic complements modern living rooms, making it an attractive addition to any home.

In conclusion, the Aiwa AV-D35 stands out as a feature-rich audio-video receiver that offers a perfect combination of sound quality, connectivity options, and user-friendly design. Whether used for an immersive home theater experience or as a part of a high-quality audio system, the AV-D35 delivers reliable performance and versatility.
Top Page Image Contents