MULTI CONTROL
7.2.2BATTERY (BAT)
Battery voltage at the Server.
7.2.3SHALLOW ALARM (SHA)
Depth at which point audible and visual alarms will be triggered, if the actual depth becomes less than the set value. (See 7.4).
7.2.4DEPTH ALARM (DEA)
Depth at which point audible and visual alarms will be triggered, if the actual depth becomes more than the set value. (See 7.4).
7.2.5ANCHOR ALARM
To set an anchor alarm, set the shallow (SHA) alarm to actual depth minus 1,5 m / 5 FT then set a value for the depth (DEA) alarm to actual value plus 1.5 m / 5 FT.
The logic is that when you are at anchor, the alarm will warn you if the boat is drifting towards deeper or shallower water.
7.2.6HEADING (HDT/HDM)
Compass heading, heading true (HDT) or heading magnetic (HDM). (See 12.3.11 C40).
7.2.7TEMPERATURE (TMP)
Water temperature. Units available in Celsius ( C ) or Fahrenheit
(F). (See 12.2.4, C23 and C24)
7.2.8UNIVERSAL TIME (UTC)
Time in hr/min/sec. This function will only be displayed if a GPS receiver is connected to the system. The (UTC) is indicated by a (U) after the time.
To set your local time (L) zone from (UTC), press SET and the first digit flashes.
If you want to add to (UTC), select underlining character ( _ ). If you want to reduce from (UTC),
select minus sign ( - ) by pressing PLUS.
To set the time zone value press PAGE, MINUS and PLUS as required.
To store the zone value press SET.
Example: In United Kingdom the local time zone setting should be ( _ 00h ZON) during winter time, and plus one hour ( _01h ZON) in the summer time.
7.2.9BOAT SPEED (BSP/unit)
Boat speed through the water. Select the unit from knots (KT), km/h (Kh) or miles/h (Mh). (See 12.1.2, C11). The text alternates between (BSP) and the selected (unit).
23