Arcam AVR100 manual Safety guidelines, Safety instructions, Safety compliance

Page 2

Safety guidelines

Safety instructions

This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions:

1. Take heed of warnings and instructions

You should read all the safety and operating instructions before operating this appliance. Retain this handbook for future reference and adhere to all warnings in the handbook or on the appliance.

2. Water and moisture

The presence of electricity near water can be dangerous. Do not use the appliance near water – for example next to a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquid filled objects such as vases should not be placed on the equipment.

4. Ventilation

Do not place the equipment on a bed, sofa, rug or similar soft surface, or in an enclosed bookcase or cabinet, since ventilation may be impeded. We recommend a minimum distance of 50mm (2 inches) around the sides and top of the appliance to provide adequate ventilation.

5. Heat

Locate the appliance away from naked flames or heat producing equipment such as radiators, stoves or other appliances (including other amplifiers) that produce heat.

6. Climate

The appliance has been designed for use in moderate climates.

7. Racks and stands

Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack it should be moved with great care, to avoid overturning the combination.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft, damp, lint-free cloth. Do not use paint thinners or other chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or polishes as they can cause indelible white marks if the unit is subsequently wiped with a damp cloth.

AVR100

AVR100

9. Power sources

Only connect the appliance to a power supply of the type described in the operating instructions or as marked on the appliance.

10. Power-cord protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, and the point where they exit from the appliance.

11. Grounding

Ensure that the grounding means of the appliance is not defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods

If the unit has a stand by function, a small amount of current will continue to flow into the equipment in this mode. Unplug the power cord of the appliance from the outlet if left unused for

a long period of time.

14. Abnormal smell

If an abnormal smell or smoke is detected from the appliance, turn the power off immediately and unplug the unit from the wall outlet. Contact your dealer immediately.

15. Servicing

You should not attempt to service the appliance beyond that described in this handbook. All other servicing should be referred to qualified service personnel.

16. Damage requiring service

The appliance should be serviced by qualified service personnel when:

A.the power-supply cord or the plug has been damaged, or

B.objects have fallen, or liquid has spilled into the appliance, or

C.the appliance has been exposed to rain, or

D.the appliance does not appear to operate normally or exhibits a marked change in performance, or

E.the appliance has been dropped or the enclosure damaged.

Safety compliance

This product has been designed to meet the EN60065 international electrical safety standard.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Arcam AVR100 surround sound receiver Safety compliance Safety guidelinesSafety instructions Contents Using this handbookSafety Positioning the unit InstallationSetting up the aerials FM aerialConnecting inputs Interconnect cablesConnecting to a power supply Connecting outputsConnecting to other equipment Input settings Setting up Using the On Screen Display OSDSetup Channel balance6ft Channel delaysDifference Delay ms Distance to listening position Your measureNo subwoofer loudspeaker? Speaker settingsPresets for typical speaker setups Input selection Using the AVR100Front panel controls EXTStoring a preset Using the tunerTuning to a station Deleting an unused presetRadio interference RDS Radio Data SystemFM Mute/Mono Using the remote control CR-340 Remote ControlBefore you start Reference Bi-wiring and bi-amping loudspeakersBi-wiring your loudspeakers Troubleshooting Problem Cause SolutionTechnical specifications Guarantee On line registrationNorme de sécurité Consignes de sécuritéNormes de sécurité Table des matières Utilisation de ce manuelSécurité Antenne FM Installation des antennesMise en place de l’AVR Antenne AMBranchement des entrées Câbles de branchementBranchement à une alimentation électrique Branchement des sortiesBranchement à d’autres appareils Réglage Utilisation de l’affichage à l’écran OSD Setup RéglagesInput Setting Réglage des entrées Channel Balance équilibrage des nivauxDistance par rapport à Position d’écoute Channel Delays réglage du retard des canauxPar exemple Avant gauche ou droit Mètres Centre Arrière gauche ou droitPas de caisson d’extrêmes graves? Speaker Settings réglage des enceintesPreset Pré-réglages des enceintes acoustiques classiques Sélection d’entrée Commandes en façadePower Alimentation Mémorisation d’une présélection Utilisation du tunerSélection d’une station Annulation d’une présélection non utiliséeSystème RDS Radio Data System Interférences radioVolume et Coupure Utilisation de la télécommandeTélécommande CR-340 Nécessaires pour utiliser les lecteurs CD et DVD ArcamBi-câblage des haut-parleurs RéférenceAvant de commence Problème Cause Solution DépannageSpécifications techniques Garantie Enregistrement sur InternetEinhaltung von Sicherheitsbestimmungen SicherheitsrichtlinienSicherheitsrichtlinien Inhalt Hinweise zum HandbuchSicherheit UKW-Antenne Aufstellen des GerätesEinrichten der Antennen MW-AntenneAnschließen der Eingänge VerbindungskabelAnschließen der Stromversorgung Anschließen der AusgängeAnschließen anderer Geräte Seite „CHANNEL Balance Kanalbalance Seite „SETUPEinrichten des Geräts Das On Screen Display OSD Vorne links oder rechts Mitte Hinten links oder rechts Seite „CHANNEL DelaysM z. B m AbstandVoreinstellungen für typische Lautsprecherkombinationen Kein Subwoofer?Steuerelemente an der Vorderseite Surround Mode Surround-ModusDer AVR100 Auswählen der EingängeDer Tuner Suchen eines SendersFM MUTE/MONO StörungenDie Fernbedienung Die Fernbedienung CR-340Bi-Wiring der Lautsprecher Erste SchritteProblem Ursache Lösung FehlerbehebungTuner Technische DatenVerstärker Die Garantie umfasst Folgendes ProblemeWeltweite Garantie Inanspruchnahme der GarantieAVR100 G l i s h Issue

AVR100 specifications

The Arcam AVR100 is a high-performance AV receiver designed to provide immersive sound and video experiences for home theaters. Renowned for its exceptional audio quality, the AVR100 incorporates advanced technologies that elevate its performance in both music and movie playback.

One of the key features of the Arcam AVR100 is its high fidelity sound reproduction. Powered by the company's renowned Class G amplification, the AVR100 delivers a robust output while minimizing distortion. With a total power output of 100 watts per channel, it can drive a variety of speaker setups, making it suitable for both small and large home theaters. The integration of sophisticated digital signal processing allows for precise control over sound, ensuring that every nuance of audio is captured, whether it’s from movies or music.

The AVR100 supports multiple surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II, allowing users to enjoy a truly cinematic experience. The receiver's multichannel capability accommodates up to seven channels, providing an enveloping sound field that enhances the viewing experience. Additionally, users can customize the sound to their liking through the built-in room correction technology, which analyzes the acoustics of the listening environment and adjusts output accordingly.

Video capabilities are equally impressive, with the AVR100 providing multiple HDMI inputs that support high-definition video signals. This ensures compatibility with a range of modern devices, from Blu-ray players to gaming consoles. The inclusion of video upscaling technology enhances standard-definition content, allowing it to be viewed in near-HD quality, and providing a seamless integration with high-definition displays.

In terms of build quality, the AVR100 showcases Arcam’s commitment to craftsmanship. The solid construction minimizes vibrations and enhances durability, which is crucial for sustained performance over time. The user-friendly interface is designed to simplify navigation through settings and features, making it accessible for both audiophiles and casual users.

Connectivity options on the AVR100 are extensive, including multiple analog and digital inputs, allowing for a variety of source components to be connected. The receiver also supports mass storage devices and streaming services, catering to the demands of modern users who wish to access music and media easily.

Overall, the Arcam AVR100 stands out as a sophisticated AV receiver that balances powerful audio performance, versatility, and ease of use, making it an excellent choice for anyone seeking to create a premium home theater experience.
Top Page Image Contents