9.When configuration is done, click on [Close] button in the “Network Settings” dialog box.
10.Restart Windows NT system. The latest configuration will not take effect unless the system restarts.
Note ! The latest configuration will not take effect unless the system restarts.
11.Once the system restarts, you may check the event log issued by the MOXA driver to see if the ports of the board are initialized successfully.
•Enter the [Administr ative] group, click on the [Event Viewer ] icon and select [System Event Log] to check a message similar to “MOXA CI- 134, with fir st ser ial por t COM3, has been enabled” for each configured board.
•If an error message similar to “Cannot find any configur ed MOXA CI- 134 boar d!” appears, refer to the “Troubleshooting” chapter for solutions.