Software Installation
Loading Driver
Having completed the setup, you can load the driver, " BIN\SER-DRV.EXE" , at the DOS prompt. The driver will detect the Industio CI-134 Series board automatically. If the board(s) is(are) detected, a message similar to below will show:
API-232 Version 3.5
Universal 2/4/8 serial ports Communication Driver
Setup driver …
Device driver setup O.K.
It means the Industio CI-134 Series driver is installed properly. At this point, you are ready to execute application that supports API-232 functions, or start developing applications using API-232 library.
If something went wrong, for instance, the board does not match the configuration or the board is missing, the screen will show a message like:
API-232 Version 3.5
Universal 2/4/8 serial ports Communication Driver
Setup driver …
None serial port found!!
It means the Industio CI-134 Series driver is not installed properly. Please refer to chapter, “Troubleshooting”, for possible reasons and solutions.
Unloading Driver
To unload (release) the Industio CI-134 Series driver from memory, type "SER-DRV/Q"at the DOS prompt.
Industio CI-134 Series User’s Manual 3-23