Eddie Bauer 22859 manual Removal of Harness, Slots from the front, Pull harness out of shell

Page 19

Removal of Harness

Harness must be removed for use as a Belt-Positioning Booster.

From bottom of seat, locate buckle’s metal clip.

Belt-Positioning

1

2

From the back of the seat, unfasten harness from splitter plate.

Pull harness adjustment strap as far out as possible.

5

Insert metal clip up through the shell and pad. From the front, pull buckle free from shell and pad. Lock buckle plates into buckle for future use.

Booster Use: 40-80 lbs. (18.1-36.3 kg), 43-52” (110.1-132.1 cm),

3

Pull harness through the

slots from the front.

 

Unthread harness from the harness retainer.

Unthread harness from the buckle plates.

Pull harness out of shell.

Over 1 year of age.

34

35

Image 19
Contents Commuter/Ventura/ High Back Booster Before You Begin Table of ContentsPage Warm Weather Use Aircraft InstallationRegistration and Recall Information Latch Anchors Seat Buckles Air Bag Seat Bight Where seat cushions meetUnderstanding Your Vehicle Anchor BracketBuckle Plates Top Anchorage Tether Strap & Hook Instructions Child Restraint PartsPreparing Child Restraint to Fit Your Child Choosing Restraint and PositionLbs .1-36.3 kg 43-52 in .1-132.1 cm and Over 1Year Old Check Harness Height To change harness locationSnap the harness retainer together Strap to tighten harnessSnugly Position harness straps over the child’s shouldersPosition the harness TogetherChild’s neck Down on the harness Press on release button and pull apartChild Manual Belts Knowing Your Vehicle BeltsVehicle belt too short Locking Clip Forward Forward-Facing Use Forward-Facing InstallationYear of age Child Restraint Forward-Facing Installation with Vehicle BeltsAfter checking for hot Your child in the childVehicle seat forward Against the backAge Storage of Top Anchorage Strap Adjusting the Top Anchorage StrapTo Attach Top Anchorage Strap Hook Belt-Positioning Booster UseSlots from the front Removal of HarnessPull harness out of shell Belt-Positioning Booster Installation Stops against the shell Reinstall HarnessRemoving Seat Pad for Cleaning Installation Tips Trouble ShootingReplacement Parts Order Form Warranty