Eddie Bauer 22859 manual Strap to tighten harness, Snugly, Snap the harness retainer together

Securing Your Child in the Child Restraint; Puzzle Buckle Plates

NOTE: Depending on your model, follow the unbuckling and buckling steps that matches your buckle plates.

4	Pull on harness adjustment
	strap to tighten harness
	snugly.

NOTE: A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press

1

Position harness straps over the child’s shoulders.

on the child’s flesh or push the child’s body into an unnatural position.

2

Fit top buckle plate over bottom buckle plate. The connection should be flat.

5

6

Snap the harness retainer together.

Position the harness retainer at mid-chest (even with arm pits), away from the child’s neck.

3	Hold buckle plates together
	with one hand and buckle
	with the other. Push buckle
	plates into buckle until you
	hear a “click.” Pull up on
	harness to make sure
	buckle is locked.

14

!WARNING:

Failure to fasten and tighten the harness system correctly can result in serious injury or death.

15