Eddie Bauer 22859 manual Together, Position the harness, Child’s neck

Securing Your Child in the Child Restraint; Dual Buckle Plates

NOTE: Depending on your model, follow the unbuckling and buckling steps that matches your buckle plates.

4	Snap the harness retainer
	together.

1

2

Position harness straps over the child’s shoulders.

Push each buckle plate into buckle until you hear a “click”. Remember to always pull up on harness straps to make sure buckle is locked tightly.

5	Position the harness
	retainer at mid-chest (even
	with arm pits), away from
	the child’s neck.

3	Pull on harness adjustment
	strap to tighten harness
	snugly.

NOTE: A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.

!WARNING:

Failure to fasten and tighten the harness system correctly can result in serious injury or death.

16 17