LG Electronics 42LT670H, 37LT670H, 32LT670H, 26LT670H Cloning Overview, Before you begin cloning

Page 28

Cloning Overview

IMPORTANT CLONING INFORMATION

There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 14):

Using a USB memory device / .tlx file

Using a USB memory device / .tll file

Using a TLL-1100A clone programmer

Using a LT2002 clone programmer

Each cloning method is described in further detail on the pages that follow. As you perform cloning procedures, be sure to complete each task as indicated. If a procedure or step is omitted or not performed completely, cloning may not work. At each step, pay attention to ensure the TV screen shows the proper message when cloning. If the message indicated does not appear, there is a problem with that step, and cloning may not be successful.

Caution: Copying a blank or incorrect memory into a TV from a clone programmer will cause the TV to operate erratically or become inoperable.

Caution: If the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will damage the clone programmer.

Before you begin cloning:

Complete the Custom Master TV Setup procedure (see pages 14 to 17).

All equipment should be connected to power and turned ON.

Both the Master and Target TVs must be in Pass-through Mode (i.e., the TV setup menus should be displayed when you press MENU SETTINGS on the Installer Remote).

Learning and Teaching is only possible between identical model TVs.

If using a USB memory device, ensure the USB device has been formatted with FAT format.

If using a USB memory device / .tlx file, ensure that the Master TV Setup does not contain a Channel Map; otherwise, Teaching will result in the Target TV(s) being configured for FTG Mode via CPU.

For both Master and Target TVs—If using a clone programmer, ensure the TV is tuned to either an Aux input or an analog (not a digital) channel.

LT2002 only—Make sure the batteries in the clone programmer are fresh. If batteries are removed, the clone programmer clock time (if set) will be lost (see page 36 for information on the clone programmer clock).

Caution: Do not unplug the TV power cord or remove/disconnect the USB memory device/ clone programmer while Learning or Teaching, as doing so may cause the TV to malfunction or harm the USB device/clone programmer, respectively.

28

206-4213

Image 28
Contents 206-4213 Rev a Copyright 2012 LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Power Cord OverloadingGrounding Disconnect DeviceCleaning Outdoor Antenna GroundingAntenna Grounding According to NEC, ANSI/NFPA Transporting ProductTable of Contents Setup Checklist Commercial Mode OverviewPass-through Mode Installer Menu External MPI ControlFTG Mode Remote Management in FTG ModeProCentric Operation ProCentric TV Interactive Menu FeaturesProCentric Interactive Menu Navigation ProCentric Setup Automated Installation Routine Wizard ProCentric Auto ConfigurationProCentric Manual Configuration 50%USB Configuration Custom Master TV Setup Clonable TV Setup Menu FeaturesBefore You Begin Cloning MethodsCustom Master TV Setup Procedure Set Installer Menu itemsSet up TV features Turn on the TVOptional Run Auto Tuning ChannelVerify the TV setup Recommended Lock the channel lineupAccessing the Installer Menu Installer MenuAcronym Description Using the Installer Menu Exiting the Installer Menu and Activating UpdatesNavigation within the Installer Menu Changing Installer Menu SettingsInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 078 through Rear RGB ENInstaller Sequence Detailed Descriptions of Installer Menu ItemsMute Disable Sleep Timer Feature LevelHDMI1 Enable Caption LockHDMI2 Enable HDMI3 EnableAtsc Tune Mode Power SavingsProcentric Back LightingPC RF Wake HR Data ChannelPC RF Wake MN Channel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningLearn Setup from Master TV USB Cloning ProceduresUSB Cloning Notes Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL Clone Programmer Cloning Procedures TLL-1100A Cloning NotesTLL-1100A Clone Programmer MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerClone Programmer Cloning Procedures FTG Mode of Operation Overview FTG Mode via CPU or EBLFTG Mode via CPU FTG Mode via EBLTV Setup Menus Determining the TV Operating ModeFunction Menu FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchFTG Mode via EBL Channel MapFTG Configuration List FTG File Manager Utilities OverviewFTG File Manager Main Screen CLEAR/SAVEFTG Channel Map Configuration Utility Print MAPUpdate FTG Channel Map EditorADD ExitFTG Installer Menu Configuration Utility Configuration SettingsRemote Jack Pack / TV Connections & Setup Remote Jack Pack SetupTV Connections RGB in PC AUDIO/VIDEOChecking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings StaticReference TV Aux Input Configuration EnableReference b-LAN Setup & Overview TV Standby State TV Power On State001 Default Off PowerReference RJP Model List & Input Auto-sensing Hierarchy RJP Legacy ModelsRJP Scaler Models RJP Input Auto-sensing HierarchyReference Restoring Factory Defaults on the TVs Installer Menu Item 117 Fact DefaultAdditional FTG Mode via CPU Options Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Reference LT670H Rear and Side Jack Panels Side Jack PanelReference Installer Remote Control Typical Key Functions PowerTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckFTG Operation Troubleshooting Commercial Mode Check / FTG Operation TroubleshootingSymptom Possible Causes Solutions Clone Programmer Troubleshooting Reset Clone Programmer After Static ShockSymptom Possible Causes Possible Solutions Clone ProgrammerGlossary of Terms Document Revision History / Open Source Software Notice Document Revision HistoryOpen Source Software Notice Date Description June Revision a New documentFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 10.58 Kb Manual 68 pages 22.8 Kb Manual 20 pages 9.41 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.