LG Electronics 32LT670H Determining the TV Operating Mode, Function Menu, TV Setup Menus

Page 38

FTG Mode of Operation Overview (Cont.)

While the TV is in FTG Mode:

Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only.

Any FTG configuration changes must be made using either the FTG File Manager (FTG Mode via CPU) or the FTG Device Configuration Application (FTG Mode via EBL). FTG Channel Map Configuration and FTG Installer Menu Configuration Utilities enable you to make changes, respectively, to the FTG Channel Map and FTG Installer Menu settings as necessary. Based on the initial method used to configure the TV for FTG Mode operation (via CPU or EBL), all subsequent changes must be transferred to either the TV CPU or the EBL via a process that is in accordance or compatible with that method (see information on local configuration in this document or refer to documentation for the head end device/server for information on remote management).

If it becomes necessary to reset the TV to Pass-through Mode, there are several options that will enable you to do so. Refer to Reference section, “Restoring Factory Defaults on the TV(s),” for further information.

Pages 45 to 48 provide overviews of the utilities that comprise the FTG File Manager. Refer to the Free- To-Guest (FTG) File Manager User Guide for further information on the FTG File Manager. Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide for information on the FTG Device Configuration Application.

Determining the TV Operating Mode

To determine the operating mode of the TV, press MENU on the Installer Remote. The menu displayed depends on the operating mode. See examples below.

If the Function Menu appears, the TV is in a mode (FTG, PPV, etc.) that does not allow the end user to change the fundamental TV setup. If the TV setup menus appear, the TV is in Pass-through Mode.

ASPECT RATIO

Move OK

ABC

16:9

Just Scan

Set By Program 4:3

Zoom

Function Menu

Indicates the TV is not in Pass-through Mode.­ While the TV is in this mode, Installer Menu settings can be accessed as read-only.

 

 

 

 

TV Setup Menus

PICTURE

AUDIO

CHANNEL

TIME

Shows that the TV is in

 

 

 

 

Pass-through Mode­.

LOCK

OPTION

INPUT

MY MEDIA

 

38

206-4213

Image 38
Contents 206-4213 Rev a Copyright 2012 LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist Installer Menu External MPI ControlFTG Mode Remote Management in FTG ModeProCentric Interactive Menu Navigation ProCentric TV Interactive Menu FeaturesProCentric Operation ProCentric Setup Automated Installation Routine Wizard ProCentric Auto ConfigurationProCentric Manual Configuration 50%USB Configuration Before You Begin Custom Master TV SetupClonable TV Setup Menu Features Cloning MethodsSet up TV features Custom Master TV Setup ProcedureSet Installer Menu items Turn on the TVOptional Run Auto Tuning ChannelVerify the TV setup Recommended Lock the channel lineupAcronym Description Installer MenuAccessing the Installer Menu Navigation within the Installer Menu Using the Installer MenuExiting the Installer Menu and Activating Updates Changing Installer Menu SettingsInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 078 through Rear RGB ENMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence HDMI1 Enable Sleep TimerFeature Level Caption LockHDMI2 Enable HDMI3 EnableProcentric Atsc Tune ModePower Savings Back LightingPC RF Wake MN Data ChannelPC RF Wake HR Channel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Clone Programmer Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerClone Programmer Cloning Procedures FTG Mode via CPU FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via EBLFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchFTG Mode via EBL Channel MapFTG File Manager Main Screen FTG Configuration ListFTG File Manager Utilities Overview CLEAR/SAVEFTG Channel Map Configuration Utility Print MAPADD UpdateFTG Channel Map Editor ExitFTG Installer Menu Configuration Utility Configuration SettingsTV Connections Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup RGB in PC AUDIO/VIDEOChecking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings StaticReference TV Aux Input Configuration Enable001 Default Off Reference b-LAN Setup & OverviewTV Standby State TV Power On State PowerRJP Scaler Models Reference RJP Model List & Input Auto-sensing HierarchyRJP Legacy Models RJP Input Auto-sensing HierarchyAdditional FTG Mode via CPU Options Reference Restoring Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Reference LT670H Rear and Side Jack Panels Side Jack PanelReference Installer Remote Control Typical Key Functions PowerTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Symptom Possible Causes Possible Solutions Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Clone ProgrammerGlossary of Terms Open Source Software Notice Document Revision History / Open Source Software NoticeDocument Revision History Date Description June Revision a New documentFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 10.58 Kb Manual 68 pages 22.8 Kb Manual 20 pages 9.41 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.