LG Electronics 32LT670H, 42LT670H, 37LT670H, 26LT670H setup guide Teach Master TV Setup to Target TV

Page 30

USB Cloning Procedures (Cont.)

Teach Master TV Setup to Target TV

1.Turn ON the Target TV.

The next step depends on whether the Automated Installation Routine Wizard appears on the screen when you turn ON the TV:

If the wizard is displayed, the TV is already in the required factory default state. Use the Up/Down arrow keys on the Installer Remote to select Exit from the Welcome screen, and press OK to exit the wizard. Then, go to step 3.

Otherwise, ensure the Target TV is in Pass-through Mode. Then, continue with step 2.

2.Use the Installer Remote to access the Target TV Installer Menu (see “Accessing the Installer Menu” on page 18 for further information). Set Installer Menu item 117 FACT DEFAULT to 001, and press OK. When the value changes back to 0, press OK again to exit the Installer Menu.

Note: This step restores factory default settings on the TV, which will in turn re-activate the Automated Installation Routine Wizard. Use the Up/Down arrow keys on the Installer Remote to select Exit from the Welcome screen. Then, press OK to exit the wizard.

3.Plug the USB memory device with the .tlx file into the Target TV USB IN port.

4.Press MENU SETTINGS on the Installer Remote to display the TV setup menus. Use the arrow navigation keys to select/highlight the Option menu icon, and then press the number “7” key a total of seven times to display the USB Download Menu.

5.Use the Up/Down arrow keys to select Teach To TV (TLX), and then press OK.

6.Use the Up/Down arrow keys to select the Master TV Setup you want to install, and then press OK. Note: Filenames identify the TV and the TLX version (see example at right).

Teaching status will be shown on a progress bar in a new window. When the Teaching process is complete, the TV will briefly display a “Teaching Completed” window and then exit the USB Download Menu.

7.Remove the USB memory device from the Target TV, and verify that the Master TV Setup is now resident on the Target TV.

Note: After the Teaching process is complete, the TV tunes according to the setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start Channel is specified, the TV will tune to that channel; otherwise, the TV will return to the last channel tuned.

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (TLX)

Previous

OK

Teach To TV (TLX)

xxLT670H-UA00003.TLX

Previous

OK

Teach To TV

UPDATING...

50%

Do not unplug!

30

206-4213

Image 30
Contents 206-4213 Rev a Copyright 2012 LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Commercial Mode Overview Setup ChecklistPass-through Mode Installer Menu External MPI ControlFTG Mode Remote Management in FTG ModeProCentric TV Interactive Menu Features ProCentric OperationProCentric Interactive Menu Navigation ProCentric Setup Automated Installation Routine Wizard ProCentric Auto ConfigurationProCentric Manual Configuration 50%USB Configuration Before You Begin Custom Master TV SetupClonable TV Setup Menu Features Cloning MethodsSet up TV features Custom Master TV Setup ProcedureSet Installer Menu items Turn on the TVOptional Run Auto Tuning ChannelVerify the TV setup Recommended Lock the channel lineupInstaller Menu Accessing the Installer MenuAcronym Description Navigation within the Installer Menu Using the Installer MenuExiting the Installer Menu and Activating Updates Changing Installer Menu SettingsInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 078 through Rear RGB ENDetailed Descriptions of Installer Menu Items Installer SequenceMute Disable HDMI1 Enable Sleep TimerFeature Level Caption LockHDMI2 Enable HDMI3 EnableProcentric Atsc Tune ModePower Savings Back LightingData Channel PC RF Wake HRPC RF Wake MN Channel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Procedures Learn Setup from Master TVUSB Cloning Notes Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Clone Programmer Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerClone Programmer Cloning Procedures FTG Mode via CPU FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via EBLDetermining the TV Operating Mode TV Setup MenusFunction Menu FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchFTG Mode via EBL Channel MapFTG File Manager Main Screen FTG Configuration ListFTG File Manager Utilities Overview CLEAR/SAVEFTG Channel Map Configuration Utility Print MAPADD UpdateFTG Channel Map Editor ExitFTG Installer Menu Configuration Utility Configuration SettingsTV Connections Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup RGB in PC AUDIO/VIDEOChecking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings StaticReference TV Aux Input Configuration Enable001 Default Off Reference b-LAN Setup & OverviewTV Standby State TV Power On State PowerRJP Scaler Models Reference RJP Model List & Input Auto-sensing HierarchyRJP Legacy Models RJP Input Auto-sensing HierarchyAdditional FTG Mode via CPU Options Reference Restoring Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Reference LT670H Rear and Side Jack Panels Side Jack PanelReference Installer Remote Control Typical Key Functions PowerTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckCommercial Mode Check / FTG Operation Troubleshooting FTG Operation TroubleshootingSymptom Possible Causes Solutions Symptom Possible Causes Possible Solutions Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Clone ProgrammerGlossary of Terms Open Source Software Notice Document Revision History / Open Source Software NoticeDocument Revision History Date Description June Revision a New documentFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 10.58 Kb Manual 68 pages 22.8 Kb Manual 20 pages 9.41 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.