LG Electronics 37LT670H Clone Programmer Cloning Procedures, TLL-1100A Cloning Notes, Mpi, Cable

Page 33

Clone Programmer Cloning Procedures

Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer

Caution: If the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will damage the clone programmer.

Cloning is accomplished using the TV/clone programmer MPI ports for communication (see figure).

TLL-1100A Cloning Notes

Read the IMPORTANT CLONING INFORMATION on page 28 before beginning any cloning procedures.

Ensure the TLL-1100A is either fully charged or connected to AC power.

Learning and Teaching is only possible between identical model TVs; however, the TLL-1100A can store up to eight different Master TV Setups.

Learn Setup from Master TV

Antenna

or CATV

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

TLL-1100A Clone

Programmer

TV Link

CHARGE

Loader

 

 

 

TLL1100A

 

Ready

 

MODE

MENU

MPI

 

ENTER

Cable

 

 

 

RECEIVE

SEND

TLL-1100A

1.Ensure the Master TV is set up completely and in Pass-through Mode.

2.Tune/set the TV to an analog channel or Aux input, and then, plug one end of the MPI cable into the TV MPI port.

3.Turn ON the TLL-1100A.

4.Use the MODE button on the TLL-1100A to select Clone Mode.

5.Use the Left/Right arrows on the TLL-1100A to select the Memory CBank (1 to 8) in which to store the Master TV Setup.

6.Plug the other end of the MPI cable into the MPI port on the bottom of the TLL-1100A. The Clone Selection Menu will display on the TV screen.

7.Press 1 on the Installer Remote to select LEARN FROM TV from the Clone Selection Menu. Then, press OK to transfer the Master TV Setup into CBankX on the TLL-1100A.

Learning usually takes about 90 seconds. “LEARNING IN PROGRESS” will be displayed on the screen while the TLL-1100A copies the Master Setup. When the Learning process is complete, a “LEARNING COM- PLETE” message will be displayed.

8.When Learning is complete, disconnect the MPI cable from the Master TV.

CLONE SELECTION MENU Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-To change menu items, press channel keys or digits.

-To execute item, press Enter.

206-4213

33

Image 33
Contents Copyright 2012 LG Electronics U.S.A., Inc 206-4213 Rev aFor Customer Support/Service, please call­ Overloading Power CordGrounding Disconnect DeviceOutdoor Antenna Grounding CleaningAntenna Grounding According to NEC, ANSI/NFPA Transporting ProductTable of Contents Commercial Mode Overview Setup ChecklistPass-through Mode External MPI Control Installer MenuRemote Management in FTG Mode FTG ModeProCentric TV Interactive Menu Features ProCentric OperationProCentric Interactive Menu Navigation ProCentric Setup ProCentric Auto Configuration Automated Installation Routine Wizard50% ProCentric Manual ConfigurationUSB Configuration Clonable TV Setup Menu Features Custom Master TV SetupBefore You Begin Cloning MethodsSet Installer Menu items Custom Master TV Setup ProcedureSet up TV features Turn on the TVChannel Optional Run Auto TuningRecommended Lock the channel lineup Verify the TV setupInstaller Menu Accessing the Installer MenuAcronym Description Exiting the Installer Menu and Activating Updates Using the Installer MenuNavigation within the Installer Menu Changing Installer Menu SettingsBrief Description of Function and Comments Installer Menu Items 000 throughRear RGB EN Installer Menu Items 078 throughDetailed Descriptions of Installer Menu Items Installer SequenceMute Disable Feature Level Sleep TimerHDMI1 Enable Caption LockHDMI3 Enable HDMI2 EnablePower Savings Atsc Tune ModeProcentric Back LightingData Channel PC RF Wake HRPC RF Wake MN To perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeBefore you begin cloning Cloning OverviewUSB Cloning Procedures Learn Setup from Master TVUSB Cloning Notes Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Cloning Notes Clone Programmer Cloning ProceduresTLL-1100A Clone Programmer MPIOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesClone Programmer Cloning Procedures FTG Mode via CPU or EBL FTG Mode of Operation OverviewFTG Mode via CPU FTG Mode via EBLDetermining the TV Operating Mode TV Setup MenusFunction Menu FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV SetupChannel Map FTG Mode via EBLFTG File Manager Utilities Overview FTG Configuration ListFTG File Manager Main Screen CLEAR/SAVEPrint MAP FTG Channel Map Configuration UtilityFTG Channel Map Editor UpdateADD ExitConfiguration Settings FTG Installer Menu Configuration UtilityRemote Jack Pack Setup Remote Jack Pack / TV Connections & SetupTV Connections RGB in PC AUDIO/VIDEOUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File GuidelinesStatic Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationTV Standby State TV Power On State Reference b-LAN Setup & Overview001 Default Off PowerRJP Legacy Models Reference RJP Model List & Input Auto-sensing HierarchyRJP Scaler Models RJP Input Auto-sensing HierarchyInstaller Menu Item 117 Fact Default Reference Restoring Factory Defaults on the TVsAdditional FTG Mode via CPU Options Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Side Jack Panel Reference LT670H Rear and Side Jack PanelsPower Reference Installer Remote Control Typical Key FunctionsGeneral Troubleshooting TroubleshootingController Quick Check Troubleshooting Flow ChartCommercial Mode Check / FTG Operation Troubleshooting FTG Operation TroubleshootingSymptom Possible Causes Solutions Reset Clone Programmer After Static Shock Clone Programmer TroubleshootingSymptom Possible Causes Possible Solutions Clone ProgrammerGlossary of Terms Document Revision History Document Revision History / Open Source Software NoticeOpen Source Software Notice Date Description June Revision a New documentFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 10.58 Kb Manual 68 pages 22.8 Kb Manual 20 pages 9.41 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.