Safety 1st 4358-5721 manual Choosing Latch or Vehicle Belts, Belt at the same time

Page 16

D-2 Vehicle Seating Position

Some seating positions in your vehicle may not be safe for this child restraint. Some vehicles do not have a seating position that can be used safely with this child restraint. If you are not sure where to place the child restraint in your vehicle, consult your vehicle owner’s manual or contact Dorel Juvenile Group Consumer Relations Dept.

Never place a child rear-facing in a seating position with an active frontal

airbag. This can result in serious injury or death.

Use the child restraint only on vehicle seats that face forward. Do not use on seats that face the sides or rear of the vehicle.

Safety Tip:

Children are safer when properly restrained in rear seating positions than in the front seating positions.

According to National Highway Traffic Safety Administration information, children in rear seating positions are statistically safer, whether you have air bags, advanced air bags, or no air bags at all.

D-3 Choosing LATCH or Vehicle Belts

LATCH Anchor Bars

The LATCH System

LATCH (Lower Anchors and Tethers for CHildren) is a universal system for installing child restraints without using vehicle seat belts.

The LATCH system can ONLY be used in vehicles that have

the LATCH anchor bars installed and designated LATCH seating positions. Most vehicles manufactured after September 2002 are equipped with LATCH.

Check your vehicle owner’s manual to see which seating positions may be equipped with the LATCH system.

Vehicle Belts

 

If LATCH is not an option,

 

you must use the vehicle

 

seat belt system to install

 

the child restraint. There

 

are some vehicle belts

 

that will not work with a

D.

child restraint or will require special attention.

Do not use both the LATCH belt and vehicle

GeneralVehicle

See next page and check your vehicle’s owner’s manual

 

for specific instructions.

 

belt at the same time.

Installation

 

29

30

Page 15 Page 17
Image 16
Page 15 Page 17
Contents See our full line of crash tested accessories at GuideGeneral Vehicle Installation .....Pages Registration and Safety NoticesRegistration and Safety Notices Safety Hotline atThank You Fax1-800-207-8182 Mailing AddressUnderstanding Your Child Restraint Before You BeginBack View Installation in Vehicle Safety InformationVehicle Seating Position Child Restraint UseChoose Position for Your Child Preparing Child Restraint to Fit Your ChildLoosen Harness Release Chest ClipCheck Buckle Position Place Child in Child RestraintTo Change Buckle Position Rear-Facing Position Forward-Facing PositionSecuring Child in Child Restraint Basic UseRemoving Child From Child Restraint Check Harness TightnessPosition Chest Clip UnbuckleReclining Child Restraint AccessoriesRemoving Harness System Removing Pad for Cleaning GuidesWith one hand while Other hand Remove the ElasticInstalling Harness System Do not use child restraint without the padUnderstanding Your Vehicle Attach Harness Straps to Splitter PlateSeat Bight Anchor Brackets Air BagsChoosing Latch or Vehicle Belts Belt at the same timeVehicle Belts For specific instructionsInstallation Knowing Your Vehicle BeltsVehicle Belts Vehicle Latch PlatesUsing the Locking Clip Installing on Aircraft Locate Locking Clip LocationAttach Locking Clip Position Locking ClipPreparing to Install Rear-Facing Preparing to Install Latch Rear-FacingInstall Rear-Facing with Fold the recline stand Check for Proper ReclineUnder the child restraint Place Child Restraint Back Seat Rear FacingVehicle Belts To Opposite Side Tighten Vehicle BeltThread Vehicle Belt Check Vehicle belt TightnessPreparing to Install Forward-Facing Adjusting Top Anchorage Strap TetherPreparing to Install Latch Forward-Facing Install Forward-Facing With LatchTighten Top Anchorage Strap Tether Check Latch BeltChild Restraint Must be Upright Install Forward-Facing With Vehicle BeltsPlace Child Restraint Vehicle Forward-Facing Warranty Limitation of DamagesTrouble Shooting Replacement Parts Order FormReplacement Parts List Part Cost

4358-5721 specifications

The Safety 1st 4358-5721 is a highly regarded child safety seat designed to ensure the utmost protection and comfort for your little one during travels. This model has carved a niche in the market due to its impressive features and innovative technologies that prioritize child safety and convenience for parents.

One of the standout features of the Safety 1st 4358-5721 is its multi-stage design. This seat is crafted to provide a secure environment from infancy through childhood. It offers a rear-facing option for younger children, ensuring that the most vulnerable passengers travel in the safest position. As your child grows, the seat can be converted to a forward-facing mode, accommodating various weight ranges and enhancing longevity.

The installation process of this car seat is simplified with the EasyInstall technology. The seat is equipped with a simple LATCH (Lower Anchors and Tethers for Children) system, which allows for quick and secure installation, reducing the likelihood of user error and enhancing safety. This feature is particularly beneficial for busy parents who appreciate ease of use without compromising safety.

Safety features are paramount in the Safety 1st 4358-5721 design. It includes a five-point harness system that secures your child firmly while allowing for easy adjustments as they grow. Furthermore, the seat is designed with side-impact protection, which is crucial in the event of a collision, minimizing the risk to your child's head and torso.

Comfort is also a key focus of this child safety seat. The Safety 1st 4358-5721 is equipped with plush padding and a removable, machine-washable cover, making it easy to maintain cleanliness and hygiene. The seat is designed to provide ample support for long journeys, catering to the diverse needs of growing children.

In terms of safety certifications, the Safety 1st 4358-5721 adheres to rigorous safety standards set by the American National Standards Institute (ANSI) and exceeds federal crash test requirements. This level of assurance offers peace of mind to parents seeking reliable options for their children’s safety.

In conclusion, the Safety 1st 4358-5721 represents a blend of security, comfort, and convenience. With its multi-stage functionality, easy installation, robust safety features, and comfort-enhancing design, this car seat is a practical choice for families seeking to ensure safe travel for their children. It stands as a testament to Safety 1st’s commitment to innovative and reliable child safety solutions.
Top Page Image Contents