Safety 1st 4358-5721 manual Using the Locking Clip

Page 18

D-5 Using the Locking Clip

A locking clip will not fix all types of vehicle seat belt problems. Review section D-4 and your vehicle’s owner manual for vehicle seat belt use with child restraints. The locking clip is located on the back of the child restraint.

The following directions describe installing the child restraint rear-facing. Same steps apply for forward-facing, except install the restraint forward-facing and thread the vehicle belt in the forward-facing belt path.

Do not use both the LATCH belt and vehicle belt at the same time.

1. Place Child Restraint in

Vehicle Rear-Facing

With child restraint in the

most reclined position, place

child restraint in the back

seat.

Check for proper recline.

NOTE: Store top anchorage

hook (tether) on the base. See section E-1.

For children between 5-22 lbs (2.3-10 kg), the bottom level to ground line MUST be level to the ground.

A

You may need to place a

large rolled towel(s) or foam

 

pool noodle(s) (A) under the

 

front of the child restraint

 

to help achieve the correct

 

recline. Check often to be

 

sure padding is still in place

 

and the vehicle belt is tight.

 

2. Thread Vehicle Belt

 

Thread the vehicle lap/

 

shoulder belt combination

 

through the rear-facing belt

 

slot.

 

 

3. Pull Vehicle Belt Across

 

 

Child Restraint

1

 

Thread vehicle seat belt

2

under pad in front of

 

buckle strap to the opposite

 

 

side. Buckle vehicle belt.

 

 

Do not place vehicle belt

 

 

over child’s legs.

NOTE: The buckle MUST be in the 1st or 2nd buckle strap slots when rear-facing. Any slot can be used for forward-facing.

D. General

4360-2334

 

 

 

Most Upright Level to Ground Line

 

 

Rear-Facing

 

 

For Children 22-40 lbs (10.1-18 kg)

 

 

AND can sit up unassisted

 

 

Recline range is between the 2 level to

 

 

ground lines.

 

 

Review instruction manual.

 

 

 

Line

 

 

LeveltoGround

 

 

MostReclined Facing

 

 

Rear-

5-22lbs

 

 

Childrenkg)

 

 

For (2.3-10MUSTBe

 

 

BottomLine

the

 

 

Levelwith.

Most

 

Ground

 

 

 

Upright Level to

Ground Line

 

For

Rear-

 

 

Children 22-40Facing

 

 

ReclineAND can sit up lbs (10.1-18 kg)

 

 

range is betweenunassisted

 

 

ground lines. the

2 level to

 

Most Reclined Level to Ground Line

 

 

Rear-Facing

 

 

For Children 5-22 lbs

 

 

 

(2.3-10 kg)

 

 

Bottom Line MUST Be

 

 

Level with the

 

 

 

Ground.

 

For children 22-40 lbs

(10.1-18 kg) and can sit up unassisted, rotate the child restraint between the 2 level to ground lines. Start by making the bottom level to ground line level, then rotate seat up. DO NOT rotate past the top most upright level to ground line.

4. Tighten Vehicle Belt

Push down firmly on the child restraint and while pulling on the vehicle shoulder belt to tighten.

Vehicle Installation

Adjust child restraint if needed.

33

34

continued on next page.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents See our full line of crash tested accessories at GuideGeneral Vehicle Installation .....Pages Registration and Safety NoticesThank You Registration and Safety NoticesSafety Hotline at Fax1-800-207-8182 Mailing AddressUnderstanding Your Child Restraint Before You BeginBack View Vehicle Seating Position Installation in VehicleSafety Information Child Restraint UseLoosen Harness Choose Position for Your ChildPreparing Child Restraint to Fit Your Child Release Chest ClipPlace Child in Child Restraint Check Buckle PositionTo Change Buckle Position Rear-Facing Position Forward-Facing PositionSecuring Child in Child Restraint Basic UsePosition Chest Clip Removing Child From Child RestraintCheck Harness Tightness UnbuckleAccessories Reclining Child RestraintRemoving Harness System With one hand while Removing Pad for CleaningGuides Other hand Remove the ElasticInstalling Harness System Do not use child restraint without the padSeat Bight Understanding Your VehicleAttach Harness Straps to Splitter Plate Anchor Brackets Air BagsVehicle Belts Choosing Latch or Vehicle BeltsBelt at the same time For specific instructionsVehicle Belts InstallationKnowing Your Vehicle Belts Vehicle Latch PlatesUsing the Locking Clip Attach Locking Clip Installing on AircraftLocate Locking Clip Location Position Locking ClipPreparing to Install Rear-Facing Preparing to Install Latch Rear-FacingUnder the child restraint Install Rear-Facing withFold the recline stand Check for Proper Recline Place Child Restraint Back Seat Rear FacingVehicle Belts Thread Vehicle Belt To Opposite SideTighten Vehicle Belt Check Vehicle belt TightnessPreparing to Install Forward-Facing Adjusting Top Anchorage Strap TetherPreparing to Install Latch Forward-Facing Install Forward-Facing With LatchTighten Top Anchorage Strap Tether Check Latch BeltInstall Forward-Facing With Vehicle Belts Child Restraint Must be UprightPlace Child Restraint Vehicle Forward-Facing Warranty Limitation of DamagesTrouble Shooting Replacement Parts Order FormReplacement Parts List Part Cost

4358-5721 specifications

The Safety 1st 4358-5721 is a highly regarded child safety seat designed to ensure the utmost protection and comfort for your little one during travels. This model has carved a niche in the market due to its impressive features and innovative technologies that prioritize child safety and convenience for parents.

One of the standout features of the Safety 1st 4358-5721 is its multi-stage design. This seat is crafted to provide a secure environment from infancy through childhood. It offers a rear-facing option for younger children, ensuring that the most vulnerable passengers travel in the safest position. As your child grows, the seat can be converted to a forward-facing mode, accommodating various weight ranges and enhancing longevity.

The installation process of this car seat is simplified with the EasyInstall technology. The seat is equipped with a simple LATCH (Lower Anchors and Tethers for Children) system, which allows for quick and secure installation, reducing the likelihood of user error and enhancing safety. This feature is particularly beneficial for busy parents who appreciate ease of use without compromising safety.

Safety features are paramount in the Safety 1st 4358-5721 design. It includes a five-point harness system that secures your child firmly while allowing for easy adjustments as they grow. Furthermore, the seat is designed with side-impact protection, which is crucial in the event of a collision, minimizing the risk to your child's head and torso.

Comfort is also a key focus of this child safety seat. The Safety 1st 4358-5721 is equipped with plush padding and a removable, machine-washable cover, making it easy to maintain cleanliness and hygiene. The seat is designed to provide ample support for long journeys, catering to the diverse needs of growing children.

In terms of safety certifications, the Safety 1st 4358-5721 adheres to rigorous safety standards set by the American National Standards Institute (ANSI) and exceeds federal crash test requirements. This level of assurance offers peace of mind to parents seeking reliable options for their children’s safety.

In conclusion, the Safety 1st 4358-5721 represents a blend of security, comfort, and convenience. With its multi-stage functionality, easy installation, robust safety features, and comfort-enhancing design, this car seat is a practical choice for families seeking to ensure safe travel for their children. It stands as a testament to Safety 1st’s commitment to innovative and reliable child safety solutions.
Top Page Image Contents