Safety 1st 4358-5721 manual Trouble Shooting, Replacement Parts Order Form

Page 29

Trouble Shooting

1.If the child restraint buckle or harness release lever sticks or you cannot get the straps tight enough around child: DO NOT LUBRICATE. Check around lever and retractor for dropped food, sticky spilled drinks, dirt, leaves, etc. Clean with warm water and/or remove object with tweezers. If you cannot get the harness to adjust and remain tight with the buckle securely locked, do not use the child restraint.

2.If your harness twists: Straighten the harness each time you put your child in the child restraint to help prevent twisting. Lock the buckle and tighten harness and it will be ready for next use.

3.If your infant sits too upright in the rear-facing position: If your vehicle seat slopes so much that your infant is sitting

upright, you may place a rolled towel(s) or foam pool noodle(s) under the front of the child restraint so that the level line on the side of the plastic shell is level (horizontal). Check often to be sure padding is still in place and the vehicle belt is tight.

4.Locate a Child Safety Seat Inspection Station for hands on training on how to use your child restraint: Visit your local Child Passenger Inspection Station or go to http://www. nhtsa.dot.gov/cps/cpsfitting/index.cfm to find your closest station.

Using padding that tilts the child restraint farther back than the level-to-ground line can result in serious injury or death.

Replacement Parts Order Form

Complete the form below. Your model number with color code and manufacturer date code MUST be included on the form to ensure proper replacement parts. Your model number with color code and the date code can be found on a sticker on the side of child restraint. Payment in U.S. dollars must accompany your order. Choose parts needed from the list on the next page.

Return the form with payment to:

Dorel Juvenile Group, Inc.

Consumer Relations Department

P.O. Box 2609

Columbus, IN 47202-2609

Fax orders to: 1-800-207-8182

Please make money orders payable to Dorel Juvenile Group, Inc. Fill in the area below to charge to Visa or Mastercard. We do not accept personal checks or Discover Card. All outside of U.S. and Canada MUST use credit card.

Ship To (Please Print): _________________________________

Name: _____________________________________________

Address: ___________________________________________

City: ______________________________________________

State/Province: __________________________ Zip _________

Telephone: _________________________________________

Email Address: ______________________________________

We MUST have this information

to process your order:

Model Number (8 to 9 characters): ____________________

Manufacture Date (mm/dd/yyyy): _____________________

55

56

Image 29
Contents Guide See our full line of crash tested accessories atRegistration and Safety Notices General Vehicle Installation .....PagesSafety Hotline at Registration and Safety NoticesThank You Fax1-800-207-8182 Mailing AddressBefore You Begin Understanding Your Child RestraintBack View Safety Information Installation in VehicleVehicle Seating Position Child Restraint UsePreparing Child Restraint to Fit Your Child Choose Position for Your ChildLoosen Harness Release Chest ClipTo Change Buckle Position Place Child in Child RestraintCheck Buckle Position Forward-Facing Position Rear-Facing PositionBasic Use Securing Child in Child RestraintCheck Harness Tightness Removing Child From Child RestraintPosition Chest Clip UnbuckleRemoving Harness System AccessoriesReclining Child Restraint Guides Removing Pad for CleaningWith one hand while Other hand Remove the ElasticDo not use child restraint without the pad Installing Harness SystemAttach Harness Straps to Splitter Plate Understanding Your VehicleSeat Bight Anchor Brackets Air BagsBelt at the same time Choosing Latch or Vehicle BeltsVehicle Belts For specific instructionsKnowing Your Vehicle Belts InstallationVehicle Belts Vehicle Latch PlatesUsing the Locking Clip Locate Locking Clip Location Installing on AircraftAttach Locking Clip Position Locking ClipPreparing to Install Latch Rear-Facing Preparing to Install Rear-FacingFold the recline stand Check for Proper Recline Install Rear-Facing withUnder the child restraint Place Child Restraint Back Seat Rear FacingVehicle Belts Tighten Vehicle Belt To Opposite SideThread Vehicle Belt Check Vehicle belt TightnessAdjusting Top Anchorage Strap Tether Preparing to Install Forward-FacingInstall Forward-Facing With Latch Preparing to Install Latch Forward-FacingCheck Latch Belt Tighten Top Anchorage Strap TetherPlace Child Restraint Vehicle Forward-Facing Install Forward-Facing With Vehicle BeltsChild Restraint Must be Upright Limitation of Damages WarrantyReplacement Parts Order Form Trouble ShootingPart Cost Replacement Parts List

4358-5721 specifications

The Safety 1st 4358-5721 is a highly regarded child safety seat designed to ensure the utmost protection and comfort for your little one during travels. This model has carved a niche in the market due to its impressive features and innovative technologies that prioritize child safety and convenience for parents.

One of the standout features of the Safety 1st 4358-5721 is its multi-stage design. This seat is crafted to provide a secure environment from infancy through childhood. It offers a rear-facing option for younger children, ensuring that the most vulnerable passengers travel in the safest position. As your child grows, the seat can be converted to a forward-facing mode, accommodating various weight ranges and enhancing longevity.

The installation process of this car seat is simplified with the EasyInstall technology. The seat is equipped with a simple LATCH (Lower Anchors and Tethers for Children) system, which allows for quick and secure installation, reducing the likelihood of user error and enhancing safety. This feature is particularly beneficial for busy parents who appreciate ease of use without compromising safety.

Safety features are paramount in the Safety 1st 4358-5721 design. It includes a five-point harness system that secures your child firmly while allowing for easy adjustments as they grow. Furthermore, the seat is designed with side-impact protection, which is crucial in the event of a collision, minimizing the risk to your child's head and torso.

Comfort is also a key focus of this child safety seat. The Safety 1st 4358-5721 is equipped with plush padding and a removable, machine-washable cover, making it easy to maintain cleanliness and hygiene. The seat is designed to provide ample support for long journeys, catering to the diverse needs of growing children.

In terms of safety certifications, the Safety 1st 4358-5721 adheres to rigorous safety standards set by the American National Standards Institute (ANSI) and exceeds federal crash test requirements. This level of assurance offers peace of mind to parents seeking reliable options for their children’s safety.

In conclusion, the Safety 1st 4358-5721 represents a blend of security, comfort, and convenience. With its multi-stage functionality, easy installation, robust safety features, and comfort-enhancing design, this car seat is a practical choice for families seeking to ensure safe travel for their children. It stands as a testament to Safety 1st’s commitment to innovative and reliable child safety solutions.