Safety 1st 4358-5721 manual Understanding Your Vehicle, Attach Harness Straps to Splitter Plate

Page 15

4.

Thread harness straps through

5

each buckle tongue (3).

 

Thread the chest clip (4). Do

 

the same to the other harness

4

end. Do Not twist harness.

Push harness ends through

 

 

slots in headrest (5).

3

5. Pull Harness Through

Pad and Shell

Make sure the metal bar is above the harness straps.

6. Attach Harness Straps to Splitter Plate

Fit loops on harness ends completely on the splitter plate.

NOTE: Make sure sewn end of the harness strap loop faces towards you.

Harness MUST be threaded under the metal bar. Harness system must be reattached correctly.

Failure to follow these warnings can result in serious injury or death.

27

D-1 Understanding Your Vehicle

Your vehicle’s features may be considerably different than those pictured here. Consult your vehicle owner’s manual to help identify your vehicle’s specific features and locations.

 

Seat Bight

Anchor Brackets

Air Bags

For Top Anchorage

Consult your vehicle

Strap (Tether)

owner’s manual for

(Forward-Facing Only)

all air bag locations.

LATCH Anchors

Vehicle Seat Belts

Located in the seat

Consult your vehicle

bight.

owner’s manual for

 

vehicle belt use.

Safety Tip:

D.

General

behind child restraint.

To help protect your vehicle seat’s upholstery from

 

damage, use a single layered towel underneath and

Vehicle

To avoid your child being seriously burned,

take the following precautions:

 

1. Park in the shade or where sun does not directly

 

hit the child restraint.

Installation

2. Cover the child restraint with a sheet or blanket

when not in use.

 

3. Check for hot child restraint and buckles before

 

placing child in child restraint.

 

 

 

28

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Guide See our full line of crash tested accessories atRegistration and Safety Notices General Vehicle Installation .....PagesFax1-800-207-8182 Mailing Address Registration and Safety NoticesSafety Hotline at Thank YouBefore You Begin Understanding Your Child RestraintBack View Child Restraint Use Installation in VehicleSafety Information Vehicle Seating PositionRelease Chest Clip Choose Position for Your ChildPreparing Child Restraint to Fit Your Child Loosen HarnessPlace Child in Child Restraint Check Buckle PositionTo Change Buckle Position Forward-Facing Position Rear-Facing PositionBasic Use Securing Child in Child RestraintUnbuckle Removing Child From Child RestraintCheck Harness Tightness Position Chest ClipAccessories Reclining Child RestraintRemoving Harness System Other hand Remove the Elastic Removing Pad for CleaningGuides With one hand whileDo not use child restraint without the pad Installing Harness SystemAnchor Brackets Air Bags Understanding Your VehicleAttach Harness Straps to Splitter Plate Seat BightFor specific instructions Choosing Latch or Vehicle BeltsBelt at the same time Vehicle BeltsVehicle Latch Plates InstallationKnowing Your Vehicle Belts Vehicle BeltsUsing the Locking Clip Position Locking Clip Installing on AircraftLocate Locking Clip Location Attach Locking ClipPreparing to Install Latch Rear-Facing Preparing to Install Rear-FacingPlace Child Restraint Back Seat Rear Facing Install Rear-Facing withFold the recline stand Check for Proper Recline Under the child restraintVehicle Belts Check Vehicle belt Tightness To Opposite SideTighten Vehicle Belt Thread Vehicle BeltAdjusting Top Anchorage Strap Tether Preparing to Install Forward-FacingInstall Forward-Facing With Latch Preparing to Install Latch Forward-FacingCheck Latch Belt Tighten Top Anchorage Strap TetherInstall Forward-Facing With Vehicle Belts Child Restraint Must be UprightPlace Child Restraint Vehicle Forward-Facing Limitation of Damages WarrantyReplacement Parts Order Form Trouble ShootingPart Cost Replacement Parts List

4358-5721 specifications

The Safety 1st 4358-5721 is a highly regarded child safety seat designed to ensure the utmost protection and comfort for your little one during travels. This model has carved a niche in the market due to its impressive features and innovative technologies that prioritize child safety and convenience for parents.

One of the standout features of the Safety 1st 4358-5721 is its multi-stage design. This seat is crafted to provide a secure environment from infancy through childhood. It offers a rear-facing option for younger children, ensuring that the most vulnerable passengers travel in the safest position. As your child grows, the seat can be converted to a forward-facing mode, accommodating various weight ranges and enhancing longevity.

The installation process of this car seat is simplified with the EasyInstall technology. The seat is equipped with a simple LATCH (Lower Anchors and Tethers for Children) system, which allows for quick and secure installation, reducing the likelihood of user error and enhancing safety. This feature is particularly beneficial for busy parents who appreciate ease of use without compromising safety.

Safety features are paramount in the Safety 1st 4358-5721 design. It includes a five-point harness system that secures your child firmly while allowing for easy adjustments as they grow. Furthermore, the seat is designed with side-impact protection, which is crucial in the event of a collision, minimizing the risk to your child's head and torso.

Comfort is also a key focus of this child safety seat. The Safety 1st 4358-5721 is equipped with plush padding and a removable, machine-washable cover, making it easy to maintain cleanliness and hygiene. The seat is designed to provide ample support for long journeys, catering to the diverse needs of growing children.

In terms of safety certifications, the Safety 1st 4358-5721 adheres to rigorous safety standards set by the American National Standards Institute (ANSI) and exceeds federal crash test requirements. This level of assurance offers peace of mind to parents seeking reliable options for their children’s safety.

In conclusion, the Safety 1st 4358-5721 represents a blend of security, comfort, and convenience. With its multi-stage functionality, easy installation, robust safety features, and comfort-enhancing design, this car seat is a practical choice for families seeking to ensure safe travel for their children. It stands as a testament to Safety 1st’s commitment to innovative and reliable child safety solutions.
Top Page Image Contents