Safety 1st 4358-5721 Choose Position for Your Child, Preparing Child Restraint to Fit Your Child

Page 7

C-1 Choose Position for Your Child

Your child’s height, weight and age determine how your child restraint should be placed in the vehicle.

5-40 lbs (2.3-18 kg)

and 19-40 in. (48-101.6 cm)

Rear-Facing using 5-point harness Child and child restraint are placed in the back seat, facing the back of the vehicle.

22-65 lbs (10.1-29 kg) and 34-52 in.

(85.1-132.1 cm) and Over 1 Year Old

Forward-Facing using 5-point harness

Child and child restraint are placed in the back seat, facing the front of the vehicle.

C-2 Preparing Child Restraint to Fit Your Child

Make these adjustments with your child in the child restraint before you install in the vehicle.

1. Loosen Harness

 

 

Push down on the

 

 

harness release lever

 

 

(under flap on the

 

 

front of child restraint)

 

 

while pulling out on

 

 

the harness straps just

 

 

above the buckle.

 

2. Release Chest Clip

 

 

Press on chest clip

 

 

release button and pull

 

 

apart.

 

3.

Unbuckle Harness

C.

Basic

 

Press red button. Pull

 

buckle tongues out. Place

Use

 

harness straps out of the

 

 

way.

4. Lift Headrest to the Highest Position

Pull out on the metal bar on the back of the seat and slide the headrest all the up. This will expose all harness slots.

11

12

continued on next page.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Guide See our full line of crash tested accessories atRegistration and Safety Notices General Vehicle Installation .....PagesFax1-800-207-8182 Mailing Address Registration and Safety NoticesSafety Hotline at Thank YouBefore You Begin Understanding Your Child RestraintBack View Child Restraint Use Installation in VehicleSafety Information Vehicle Seating PositionRelease Chest Clip Choose Position for Your ChildPreparing Child Restraint to Fit Your Child Loosen HarnessCheck Buckle Position Place Child in Child RestraintTo Change Buckle Position Forward-Facing Position Rear-Facing PositionBasic Use Securing Child in Child RestraintUnbuckle Removing Child From Child RestraintCheck Harness Tightness Position Chest ClipReclining Child Restraint AccessoriesRemoving Harness System Other hand Remove the Elastic Removing Pad for CleaningGuides With one hand whileDo not use child restraint without the pad Installing Harness SystemAnchor Brackets Air Bags Understanding Your VehicleAttach Harness Straps to Splitter Plate Seat BightFor specific instructions Choosing Latch or Vehicle BeltsBelt at the same time Vehicle BeltsVehicle Latch Plates InstallationKnowing Your Vehicle Belts Vehicle BeltsUsing the Locking Clip Position Locking Clip Installing on AircraftLocate Locking Clip Location Attach Locking ClipPreparing to Install Latch Rear-Facing Preparing to Install Rear-FacingPlace Child Restraint Back Seat Rear Facing Install Rear-Facing withFold the recline stand Check for Proper Recline Under the child restraintVehicle Belts Check Vehicle belt Tightness To Opposite SideTighten Vehicle Belt Thread Vehicle BeltAdjusting Top Anchorage Strap Tether Preparing to Install Forward-FacingInstall Forward-Facing With Latch Preparing to Install Latch Forward-FacingCheck Latch Belt Tighten Top Anchorage Strap TetherChild Restraint Must be Upright Install Forward-Facing With Vehicle BeltsPlace Child Restraint Vehicle Forward-Facing Limitation of Damages WarrantyReplacement Parts Order Form Trouble ShootingPart Cost Replacement Parts List

4358-5721 specifications

The Safety 1st 4358-5721 is a highly regarded child safety seat designed to ensure the utmost protection and comfort for your little one during travels. This model has carved a niche in the market due to its impressive features and innovative technologies that prioritize child safety and convenience for parents.

One of the standout features of the Safety 1st 4358-5721 is its multi-stage design. This seat is crafted to provide a secure environment from infancy through childhood. It offers a rear-facing option for younger children, ensuring that the most vulnerable passengers travel in the safest position. As your child grows, the seat can be converted to a forward-facing mode, accommodating various weight ranges and enhancing longevity.

The installation process of this car seat is simplified with the EasyInstall technology. The seat is equipped with a simple LATCH (Lower Anchors and Tethers for Children) system, which allows for quick and secure installation, reducing the likelihood of user error and enhancing safety. This feature is particularly beneficial for busy parents who appreciate ease of use without compromising safety.

Safety features are paramount in the Safety 1st 4358-5721 design. It includes a five-point harness system that secures your child firmly while allowing for easy adjustments as they grow. Furthermore, the seat is designed with side-impact protection, which is crucial in the event of a collision, minimizing the risk to your child's head and torso.

Comfort is also a key focus of this child safety seat. The Safety 1st 4358-5721 is equipped with plush padding and a removable, machine-washable cover, making it easy to maintain cleanliness and hygiene. The seat is designed to provide ample support for long journeys, catering to the diverse needs of growing children.

In terms of safety certifications, the Safety 1st 4358-5721 adheres to rigorous safety standards set by the American National Standards Institute (ANSI) and exceeds federal crash test requirements. This level of assurance offers peace of mind to parents seeking reliable options for their children’s safety.

In conclusion, the Safety 1st 4358-5721 represents a blend of security, comfort, and convenience. With its multi-stage functionality, easy installation, robust safety features, and comfort-enhancing design, this car seat is a practical choice for families seeking to ensure safe travel for their children. It stands as a testament to Safety 1st’s commitment to innovative and reliable child safety solutions.
Top Page Image Contents