Safety 1st 4358-5721 manual Vehicle Belts

Page 22

6. Tighten LATCH Belt

Push down firmly on the child restraint and pull up on the free end of LATCH belt to tighten.

It maybe easier to tighten the LATCH belt through the belt path opening as shown.

7. Check LATCH Belt

Tightness

Grasp the child restraint at the belt path with one hand. Push and pull the child

restraint from side to side, forward and back. The child

restraint should not move more than 1 inch.

NOTE: If it moves more than an inch, try reinstalling the child restraint or try another seating location.

Secure your child in the child restraint. Recheck the recline angle to make sure it is reclined according to your child’s weight. Repeat steps if not reclined correctly.

6. To Remove LATCH Belt

 

From Vehicle Anchor

 

Remove child from child

 

restraint. Press down firmly

 

on adjuster side of child

 

restraint and press release

 

button to release tension.

 

Unhook LATCH from bar by

 

squeezing spring lever and

1

twist hook (1). Pull LATCH

hook away (2).

 

2

41

E-4 Install Rear-Facing with

E.

Installing

Vehicle Belts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not use the LATCH system along with the

Rear-

vehicle lap or lap/shoulder belt. Secure LATCH

belts when using the vehicle belts.

Check the vehicle belt before each use. Use only

Facing

if the belt is tightened properly and securely.

 

Attach the top anchorage hook (tether) to recline

 

stand when used rear-facing.

 

Failure to follow these warnings can result in serious injury or death.

1. Secure LATCH Belts

You MUST fasten the LATCH belt hooks to the side of plastic shells as shown when using the vehicle seat belts.

2. Store Top Anchorage

Hook (Tether)

Attach the top anchorage hook (tether) to recline stand as shown. Tighten tether to remove the slack.

3.Place Child Restraint in the Back Seat Rear- Facing

Move the front seats forward to give you room to install the child restraint. With the child restraint in the fully reclined position, center the child restraint in the chosen seating position.

42continued on next page.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents See our full line of crash tested accessories at GuideGeneral Vehicle Installation .....Pages Registration and Safety NoticesThank You Registration and Safety NoticesSafety Hotline at Fax1-800-207-8182 Mailing AddressUnderstanding Your Child Restraint Before You BeginBack View Vehicle Seating Position Installation in VehicleSafety Information Child Restraint UseLoosen Harness Choose Position for Your ChildPreparing Child Restraint to Fit Your Child Release Chest ClipCheck Buckle Position Place Child in Child RestraintTo Change Buckle Position Rear-Facing Position Forward-Facing PositionSecuring Child in Child Restraint Basic UsePosition Chest Clip Removing Child From Child RestraintCheck Harness Tightness UnbuckleReclining Child Restraint AccessoriesRemoving Harness System With one hand while Removing Pad for CleaningGuides Other hand Remove the ElasticInstalling Harness System Do not use child restraint without the padSeat Bight Understanding Your VehicleAttach Harness Straps to Splitter Plate Anchor Brackets Air BagsVehicle Belts Choosing Latch or Vehicle BeltsBelt at the same time For specific instructionsVehicle Belts InstallationKnowing Your Vehicle Belts Vehicle Latch PlatesUsing the Locking Clip Attach Locking Clip Installing on AircraftLocate Locking Clip Location Position Locking ClipPreparing to Install Rear-Facing Preparing to Install Latch Rear-FacingUnder the child restraint Install Rear-Facing withFold the recline stand Check for Proper Recline Place Child Restraint Back Seat Rear FacingVehicle Belts Thread Vehicle Belt To Opposite SideTighten Vehicle Belt Check Vehicle belt TightnessPreparing to Install Forward-Facing Adjusting Top Anchorage Strap TetherPreparing to Install Latch Forward-Facing Install Forward-Facing With LatchTighten Top Anchorage Strap Tether Check Latch BeltChild Restraint Must be Upright Install Forward-Facing With Vehicle BeltsPlace Child Restraint Vehicle Forward-Facing Warranty Limitation of DamagesTrouble Shooting Replacement Parts Order FormReplacement Parts List Part Cost

4358-5721 specifications

The Safety 1st 4358-5721 is a highly regarded child safety seat designed to ensure the utmost protection and comfort for your little one during travels. This model has carved a niche in the market due to its impressive features and innovative technologies that prioritize child safety and convenience for parents.

One of the standout features of the Safety 1st 4358-5721 is its multi-stage design. This seat is crafted to provide a secure environment from infancy through childhood. It offers a rear-facing option for younger children, ensuring that the most vulnerable passengers travel in the safest position. As your child grows, the seat can be converted to a forward-facing mode, accommodating various weight ranges and enhancing longevity.

The installation process of this car seat is simplified with the EasyInstall technology. The seat is equipped with a simple LATCH (Lower Anchors and Tethers for Children) system, which allows for quick and secure installation, reducing the likelihood of user error and enhancing safety. This feature is particularly beneficial for busy parents who appreciate ease of use without compromising safety.

Safety features are paramount in the Safety 1st 4358-5721 design. It includes a five-point harness system that secures your child firmly while allowing for easy adjustments as they grow. Furthermore, the seat is designed with side-impact protection, which is crucial in the event of a collision, minimizing the risk to your child's head and torso.

Comfort is also a key focus of this child safety seat. The Safety 1st 4358-5721 is equipped with plush padding and a removable, machine-washable cover, making it easy to maintain cleanliness and hygiene. The seat is designed to provide ample support for long journeys, catering to the diverse needs of growing children.

In terms of safety certifications, the Safety 1st 4358-5721 adheres to rigorous safety standards set by the American National Standards Institute (ANSI) and exceeds federal crash test requirements. This level of assurance offers peace of mind to parents seeking reliable options for their children’s safety.

In conclusion, the Safety 1st 4358-5721 represents a blend of security, comfort, and convenience. With its multi-stage functionality, easy installation, robust safety features, and comfort-enhancing design, this car seat is a practical choice for families seeking to ensure safe travel for their children. It stands as a testament to Safety 1st’s commitment to innovative and reliable child safety solutions.
Top Page Image Contents