Polaroid IP300, Wireless Surveillance Camera user manual Wireless LAN Settings

Page 18

Polaroid Settings

Figure 5.9

To find the DNS Server, follow similar instructions above as you did for Gateway. If your router supports DHCP function, choose “Obtain IP from DHCP Server” to get dynamic IP.

Figure 6.0

Http Port. In most cases, you may leave the value that comes up as is. If it does not work however, you may change the number to another value (i.e. 85)

Polaroid Settings

3.4 Wireless LAN Settings

Figure 6.1

Figure 6.2

Note: Follow the instruction numbers as they appear in this figure.

1.You must have a wireless router.

2.Your wireless antenna must be installed on camera.

3.If your router is encrypted, you must ascertain and keep the key code.

4.To login in to a camera, click on Network, then go to Wireless LAN settings to set-up and then Scan. Scan two times, the WAN LIST will appear and you may choose the camera you wish to use.

5.If there is no encryption, simply click Submit.

6.If there is encryption, input the share key and click on Submit.

7.Wait about 30 seconds, until the camera reboots, and then unplug the network cable.The camera will now transmit wirelessly.

34

IP300 Manual

35

 

 

 

 

Image 18
Contents Wireless Surveillance Camera Table of Contents Packing List Product ViewsPC System Requirements Hardware InstructionSoftware Installation PRE-INSTALLATION Precautions IP Camera ToolSIX Options are Available VIA the IP Camera Tool Network Configuration Basic PropertiesUgrade Firmware Flush ARP Buffer Camera LoginRefresh Camera List Refresh camera list manually About IP Camera ToolTo USE IE Browser to Gain Access Polaroid Software SAFARI, FIREFOX, Google Chrome Browser Access Mobile Phone AccessActivex Mode for IE Browser Access On Screen Display OSD settingsVisitor Status Rate and Resolution Operator AccessPreset Positions Mode, Brightness, ContrastAdministrator Access MULTI-DEVICE SettingsSet Multi-Device on LAN Set Multi-Device on WAN using Port Forwarding Upgrade Device FirmwareNetwork Settings Restore Factory SettingsReboot Device Basic Network SettingsWireless LAN Settings Adsl Settings UPnP SettingsDdns Service Settings Third Party Ddns Belkin TP-LINKSystem Settings Device Info DlinkUser Settings Alias SettingsDate & Time Settings PT SettingsIndicator Settings Backup and RestoreMSN Settings Other Settings Mail Service SettingsFTP Service Settings Alarm SettingsAlarm Input Armed/ IO Linkage on Alarm Motion Detection ArmedMotion Detection Sensitivity Upload Image on Alarm IO Pins for IO Alarm LinkageSend Mail on Alarm Trigger LevelSound on Alarm Record on AlarmPath Settings Server Push Mode for Safari, FireFox, Google Browser Sign in mobile phoneFrequently Asked Questions If I Need Assistance Where can I GET IT?Problems with Network BANDWIDTH?