Polaroid • FAQs
FREQUENTLY ASKED QUESTIONS.
DOES POLAROID IP CAMERA WORK ON MAC OS SYSTEMS AS WELL AS MICROSOFT WINDOWS?
Yes, the system is designed to work with both operating systems.You will find information in your CD folders concerning MAC systems, however, the
IF I NEED ASSISTANCE WHERE CAN I GET IT?
If you encounter difficulties
FORGOTTEN AMINSISTRATOR USERNAME AND/OR PASSWORD? Press RESET BUTTON and hold for 15 seconds. After 15 seconds, the user name and password will return to factory default which is username: admin, password: No password. At this point you may add in a user name and password of your choice.
IFYOU’RETOLD SUBNET DOESN’T MATCH, DBCLICKTO CHANGE?
Once you click on the message, the settings box will appear. Click on the “Obtain IP from DHCH server (fig 2.2). It should obtain the information and set up automatically. If, however, it does not, go to the local area connection of your computer to get proper subnet and gateway of your computer and then change the camera numbers to these numbers exactly.
HOW DO I GETTHE IP ADDRESS CONFIGURATION?
To see if your computer and camera chare the same subnet, click My Computer, then Control Panel, then Network & Dial Up Connections, then LAN, then Attributes, then go to Internet Protocols (TCP/IP) and check the IP address
and the Subnet Mask. Make sure the numbers here and the numbers for your camera coincide. Do this manually in the camera
REASONS CAMERA CANNOT BE ACCESSED OVER INTERNET?
There could be several reasons: 1) ActiveX controller is not installed properly. Review Figures 2.9 through 3.1 of this manual. 2)Your firewall or
3)Port forwarding is incorrect (refer to figure 7.4 through 7.9 of this manual and make sure the settings are correct.
IP CAMERATOOL CAN’T FIND CAMERA’S IP?
First check all camera connections. Make sure the DHCP in your router is enabled; do not enable MAC address filter. Make sure firewall and
Polaroid • FAQs
UPnP ALWAYS FAILS?
Sometimes your firewall or
WHY ISN’TTHE SHORTCUTTO IP CAMERATOOL APPEARING?
If you use Windows7 or Vista it may be necessary to check if you installed it properly.You should be looking for an icon that takes you to C:/Windows/ System32/IPCamera.exe, please direct the installation to C://Windows/ SysWOW64/IPCamera.exe
WHY CAN’T I CHANGETHE RECORD PATH?
Sometimes Windows7 or Vista will not allow you to change the record path. To override this problem you must add camera as a trusted site. Go to IE Browser, then toTool, then click on Internet Proper, then click on Security, then click on trusted sites, then sites and then click on Add.YOU CAN ALSO RUN AS AMINISTRATOR AND INPUT IP ADDRESS MANUALLY.
CAN’T FIND MULTI-DEVICE SETTINGS AND RECORD ICON?
Remember that these functions are only available using ActiveX. If your running your cameras on browsers such as Safari, Google Chrome or Firefox, these functions are not available to you.
CAMERA STILL WON’T CONNECT WIRELESSLY?
If after you set wireless settings and disconnect cable to router, you still cannot connect wirelessly, check that your settings are correct. See WIRELESS LAN SETTINGS for details. Double click the SSID, go to the Encryption Share Key, then Channel. Make sure they are all the same settings as your router. Note that your Share key should not include special characters. Use only a word and number are best. And make sure your MAC address filter is not on.
CAN’T SEE OTHER CAMERAS WHEN ACCESSING REMOTELY?
If you want to see all cameras in your system, you must make sure they are all added into your
REMOTE LOG IN ONLY BRINGS ME TO BLACK SCREEN OR CODE? If you were able to access your remote login page, your DDNS settings are correct. However, there may be internet speed problems especially if you are access on
YOUR USING ACTOVEX BUT STILL GETTING NO PICTURE?
First make sure you’ve clicked on ActiveX properly
60 | IP300 Manual | 61 |
| ||
|
|
|