Polaroid Wireless Surveillance Camera, IP300 user manual Belkin, Tp-Link

Polaroid • Settings Polaroid • Settings

SETTINGS AND SEARCHING FORTHE NETWORK PATH, ONCE IT COMES UP	BELKIN:
YOU CAN RUNYOUR MOUSE OVERTHE ICONS FOR PC AND GATEWAYTO
ASCERTAINYOUR SYSTEM ADDRESSES.)	1. Login router
	2. Choose “Firewall”, select “Virtual Servers”
Set Port Forwarding in the router. It is important to set the port forwarding in	3. Input the port (except 80) and IP address, then click SAVE.
your router to the IP of your camera directly in order for the camera to work	NOTE:The port and IP address should be same as camera.
correctly. Because there are countless routers from around the world, it is
impossible to provide a universal method of set up.The following samples
however, do provide methods for several common router systems:
TP-LINK:
1. Login the router.
2. Choose “Forwarding”, select “Virtual Servers”
3. Click the Add New Button (an example of the pop-up is below)

Figure 7.6

Figure 7.5

4.Fill in the service port (exception is 80), IP address of camera, then click SAVE. NOTE:The port and IP address should be same as camera.

40 IP300 Manual 41