Polaroid Wireless Surveillance Camera, IP300 Adsl Settings, UPnP Settings, Ddns Service Settings

Page 19

Polaroid Settings

Figure 6.3

Figure 6.4

Figure 6.5

Polaroid Settings

3.5 ADSL Settings

When connect to the Internet through ADSL directly, simply enter ADSL user name and password obtained from ISP. (see figure 6.6 and figure 6.7 below)

Figure 6.6

Figure 6.7

3.6 UPnP Settings

Click UPnP Settings to choose Using UPnP to Map Port

Figure 6.8

All you have to do is click Submit in order to automatically allow your camera to utilize UPnP forwarding. If your router supports UPnP, you will not have to do port forwarding.

Figure 6.9

NOTE: For UPnP, make sure your UPnP setting is on in your router. If your router does not support UPnP, it will indicate an error. In this case, we recommend you do port forwarding manually (see figure 7.4-7.9 for details).

3.7 DDNS Service Settings

Figure 7.0

36

IP300 Manual

37

 

 

 

 

Image 19
Contents Wireless Surveillance Camera Table of Contents Product Views Packing ListHardware Instruction PC System RequirementsSoftware Installation IP Camera Tool PRE-INSTALLATION PrecautionsSIX Options are Available VIA the IP Camera Tool Basic Properties Network ConfigurationUgrade Firmware About IP Camera Tool Camera LoginRefresh Camera List Refresh camera list manually Flush ARP BufferTo USE IE Browser to Gain Access Polaroid Software Mobile Phone Access SAFARI, FIREFOX, Google Chrome Browser AccessOn Screen Display OSD settings Activex Mode for IE Browser AccessVisitor Status Operator Access Rate and ResolutionMode, Brightness, Contrast Preset PositionsMULTI-DEVICE Settings Administrator AccessSet Multi-Device on LAN Upgrade Device Firmware Set Multi-Device on WAN using Port ForwardingBasic Network Settings Restore Factory SettingsReboot Device Network SettingsWireless LAN Settings UPnP Settings Adsl SettingsDdns Service Settings Third Party Ddns TP-LINK BelkinDlink System Settings Device InfoPT Settings Alias SettingsDate & Time Settings User SettingsBackup and Restore Indicator SettingsMSN Settings Mail Service Settings Other SettingsAlarm Settings FTP Service SettingsMotion Detection Armed Alarm Input Armed/ IO Linkage on AlarmMotion Detection Sensitivity Trigger Level IO Pins for IO Alarm LinkageSend Mail on Alarm Upload Image on AlarmRecord on Alarm Sound on AlarmPath Settings Sign in mobile phone Server Push Mode for Safari, FireFox, Google BrowserIf I Need Assistance Where can I GET IT? Frequently Asked QuestionsProblems with Network BANDWIDTH?