Polaroid Wireless Surveillance Camera, IP300 Alias Settings, Date & Time Settings, User Settings

Page 23

Polaroid Settings

3.9 Alias Settings

Figure 8.2

You may assign your camera (or cameras) any name(s) you choose by entering in the Alias box.

3.10 Date & Time Settings

Figure 8.3

Figure 8.4

Set time and date for your camera. Make sure you’re put in the ClockTime Zone for your country.You can choose to Sync with NTP Server (fig. 8.3) or Sync with PCTime (figure 8.4)

3.11 User Settings

You can have up to eight users on the Polaroid IP camera system.You can set up users names, passwords.The users can be listed as Visitors, Administrators, or Operators. Each is assigned a level of authority and permission to have access to the system with different levels of access. For example:

Polaroid Settings

Visitor: See figure 2.7 details of usage at this level.

Operator:You can control the direction of the IP Camera and set parameters.

Administrator:You can set up advanced configurations of the IP Camera. (See 3.1.22)

Figure 8.5

3.12 PT Settings

Figure 8.6

1.Go center on boot. Automatically rotates camera at start.

2.PT (Pan/Tilt) Speed. Set Pan/Tilt Speed.

3.Upward patrol speed. Set cruising speed upward

4.Downward patrol speed. Set cruising speed downward.

5.Left patrol speed. Set cruising speed to left.

6.Rightward patrol speed. Set cruising to right.

NOTE: Value 0 is fastest speed. Value 10 is slowest. Recommended speed is 5.

44

IP300 Manual

45

 

 

 

 

Image 23
Contents Wireless Surveillance Camera Table of Contents Product Views Packing ListHardware Instruction PC System RequirementsSoftware Installation SIX Options are Available VIA the IP Camera Tool PRE-INSTALLATION PrecautionsIP Camera Tool Ugrade Firmware Network ConfigurationBasic Properties About IP Camera Tool Camera LoginRefresh Camera List Refresh camera list manually Flush ARP BufferTo USE IE Browser to Gain Access Polaroid Software Mobile Phone Access SAFARI, FIREFOX, Google Chrome Browser AccessVisitor Status Activex Mode for IE Browser AccessOn Screen Display OSD settings Operator Access Rate and ResolutionMode, Brightness, Contrast Preset PositionsSet Multi-Device on LAN Administrator AccessMULTI-DEVICE Settings Upgrade Device Firmware Set Multi-Device on WAN using Port ForwardingBasic Network Settings Restore Factory SettingsReboot Device Network SettingsWireless LAN Settings Ddns Service Settings Adsl SettingsUPnP Settings Third Party Ddns TP-LINK BelkinDlink System Settings Device InfoPT Settings Alias SettingsDate & Time Settings User SettingsMSN Settings Indicator SettingsBackup and Restore Mail Service Settings Other SettingsAlarm Settings FTP Service SettingsMotion Detection Sensitivity Alarm Input Armed/ IO Linkage on AlarmMotion Detection Armed Trigger Level IO Pins for IO Alarm LinkageSend Mail on Alarm Upload Image on AlarmPath Settings Sound on AlarmRecord on Alarm Sign in mobile phone Server Push Mode for Safari, FireFox, Google BrowserIf I Need Assistance Where can I GET IT? Frequently Asked QuestionsProblems with Network BANDWIDTH?