Polaroid IP300, Wireless Surveillance Camera Indicator Settings, Backup and Restore, MSN Settings

Polaroid • Settings

3.13 Indicator Settings

Figure 8.7

You have three options for setting the pilot lamp.

1.Non-connected network out.Twinkles while connected to network and shuts off when connection is terminated.

2.Non-connected network with more slow frequency flicker.Twinkles while connected to network and slows when connection is shut down.

3.Been extinguished. Use to keep connections OFF.

3.14 Backup and Restore

Figure 8.8

1.Back up. Back up IP Camera and all parameter settings you’ve already set by clicking on Submit. All parameters will be stored in BIN file.

2.Restore. Restore IP Camera and all parameter settings. If you wish to change camera settings to new status, click Browse and load new settings in BIN file, then Submit.

Figure 8.9

Polaroid • Settings

MSN Settings.

NOTE: Before setting MSN, set port forwarding (see DDNS setting instructions for details)

Go to MSN settings Page. File in correct user name and password, add MSN buddies, up to ten friends. Once submitted, they will appear in MSN friend’s list. For MSN status, click on Device info.

After you run your MSN page, open chat dialog, type in the word “url”.After several seconds you will get a reply for remote access IP address for this particular IP camera.

46 IP300 Manual 47