Yamaha YSP-3050 Automatic preset tuning, 8 8, M H z, 44 En, input source, display, seconds, Notes

FM tuning

3 Press SEARCH repeatedly until the AUTO	2 Press FM/XM repeatedly to select FM as the
indicator disappears from the front panel	input source.
display.	“FM” appears in the front panel display.
SEARCH	FM/XM
	y

A

F M 8 8 . 9 M H z

•You can also press INPUT on the front panel repeatedly to select FM as the input source.

•If “XM” appears in the front panel display, press FM/XM again to display “FM”.

	No colon (:)	3 Press and hold MEMORY for more than three
	If a colon (:) appears in the front panel display, tuning	seconds.
		The preset station group and number, the MEMORY
	is not available. Press PRESET/TUNE to turn the
		indicator, and the AUTO indicator flash. Automatic
	colon (:) off.
		preset tuning starts from the lowest frequency and
		proceeds toward higher frequencies.
4	Press ENTRY ( / ) to tune into the

desired station manually.	MEMORY
ENTRY
ENTER	Flashes

y

Hold down the button for quick search.

Automatic preset tuning

You can use the automatic preset tuning feature to store up to 40 FM stations with strong signals (A1 to E8: 5 preset station groups with 8 preset station numbers each). You can recall the preset stations easily by selecting the preset station groups and numbers.

1Set the operation mode selector to TV/AV.

TV/AV

YSP

		8 8 . 9	M H z
A 1	: F M

Flashes

When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.

Notes

•When you overwrite an existing preset station, the previously stored FM station is cleared.

•If the number of automatically preset stations does not reach 40 (E8), this unit automatically stops searching.

•Only FM stations with sufficient signal strength are preset automatically. If the desired station is weak in signal strength, tune into it manually and store it as described in “Manual preset tuning” on page 45.

44 En