Ehdmi Set, ASUPPORT AUDIO, BAUDIO SELECT, 84 En

MANUAL SETUP

■HDMI SET (HDMI settings)

Use to change the HDMI audio/video output/input to match the connected component.

Choices: SUPPORT AUDIO (Support audio), AUDIO SELECT (Audio select), VIDEO INFO (Video information), UP-SCALING (HDMI up-scaling), ASPECT RATIO (HDMI aspect ratio), HDMI CONTROL (HDMI control)

E)HDMI SET

.a)SUPPORT AUDIO b)AUDIO SELECT c)VIDEO INFO. d)UP-SCALING e)ASPECT RATIO f)HDMI CONTROL

[p]/[p]:Up/Down [ENTER]:Enter

SUPPORT AUDIO (Support audio)

Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit.

Choices: YSP-3050, OTHER

a)SUPPORT AUDIO

pYSP-3050

OTHER

[p]/[p]:Select [ENTER]:Return

Notes

•This setting is effective when HDMI CONTROL is set to OFF (see page 85).

•The HDMI video signals input at one of the HDMI IN jacks of this unit are always output at the HDMI OUT jack of this unit.

•When HDMI CONTROL is set to ON, this setting is ineffective. This unit follows the setting of the HDMI control-compatible TV.

AUDIO SELECT (Audio select)

Use to select whether to use the signals input at the HDMI IN jack, with respect to the audio signals of the device connected to the HDMI jack.

When only two channels of the multi-channel audio signals input at the HDMI IN jack are output, connect this unit and the player via an optical or coaxial digital connection, as well as the HDMI connection, and set AUDIO SELECT to OFF. The audio signals are output from this unit in multi-channel via the connected optical or coaxial digital jacks.

Choices: ON, OFF

b)AUDIO SELECT

. HDMI1 TV/STB;;;;;;;;; ON (TV/STB)

HDMI2 DVD;;;;;;;;;;; ON ( DVD )

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

Note

•The video signal input at the HDMI jacks is output, regardless of the AUDIO SELECT setting.

•The AUDIO SELECT setting is applied only to the sound output from this unit. It is invalid when the sound is output from the device connected to the HDMI OUT jacks.

VIDEO INFO (Video information)

Use to display the video information of the current input signal.

Choices: HDMI SIGNAL, HDMI RES., HDMI ERROR

c)VIDEO INFO.

.HDMI SIGNAL;;;HDMI -> HDMI HDMI RES.;;;;1080P -> 1080P HDMI ERROR;;;----

[p]/[p]:Up/Down [ENTER]:Return

• Select HDMI SIGNAL to display the type of the HDMI input/output signals.

• Select HDMI RES. to display the resolution of the HDMI input/output signals.

• Select HDMI ERROR to display the error message for HDMI sources or devices connected

(see page 102 for details).

UP-SCALING (HDMI up-scaling)

Use this feature to activate or deactivate the HDMI up- conversion of the analog video signals input at the composite video and component video jacks so that the up-scaled analog video signals are output at the HDMI OUT jack. This unit up-scales the analog video signals as follows:

•480i (NTSC)/576i (PAL) → 480p (NTSC)/576p (PAL),

1080i or 720p

•480p (NTSC)/576p (PAL) → 1080i or 720p

Choices: OFF, THROUGH, 480p (or 576p), 1080i, 720p

d)UP-SCALING

HDMI UP-SCALING;;THROUGH

XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX

[p]/[p]:Select [ENTER]:Return