Yamaha YSP-3050 owner manual Connecting external components to this unit, Installing this unit

Page 117
YSP-3050

YSP-3050

QUICK REFERENCE GUIDE

Supplied accessories used for connections and operations in this guide

sAudio pin cable (x1)

sOSD* video pin cable (x1)

sOptical cable (x1)

sCoaxial cable (x1)

sDigital audio pin cable (x1)

sIntelliBeam microphone (x1)

sCardboard microphone stand (x1)

sDemonstration DVD (x1)

*OSD: On-Screen Display

2

Connecting external components to this unit

Connecting external components such as a TV or DVD player/recorder to this unit.

Connect your TV or DVD player/recorder to this unit using appropriate cables as shown below.

For further information on connecting other components, see pages 16 to 23 in the Owner’s Manual.

Connection

This connection example shows a way to connect external components such as a TV or DVD

player/recorder to this unit by using the supplied cable. You can enjoy the multi-channel audio from the

example 1

DVD player/recorder and the analog/digital audio from the TV. Use the video pin cable supplied with your

DVD player/recorder to make a video connection between your DVD player/recorder and TV.

 

Connection

This connection example shows a way to make the most of the capability of this unit. You can enjoy

DVD audio and video with higher quality via the HDMI cable. In case your TV does not have a built-in

example 2

digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite tuner, cable TV

tuner, or digital airwave tuner via the HDMI cable. For details, see “Connections using HDMI cables” on

 

 

page 18 and “Using the HDMI control feature” on page 73 in the Owner’s Manual.

Connect cables in the following order

This quick reference guide explains steps to connect a TV and a DVD player/recorder to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual.

1

Installing this unit

Decide where to install this unit.

Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.

Connect cables in the following order

 

 

 

 

Supplied

 

1

Audio pin cable

3

Optical cable

 

(Inputs the TV analog audio sounds to this unit)

 

(Inputs the TV digital audio sounds to this unit)

2

OSD video pin cable

4

Digital audio pin cable

 

(Displays the YSP-3050 menu screen on the TV)

 

(Inputs the DVD digital audio sounds to this unit)

Sold separately

1HDMI cable

(Displays the DVD digital video and the YSP-3050 menu screen on the TV)

2HDMI cable

(Inputs the DVD digital audio/video signals to this unit)

TV

Install this unit in the exact center of the wall when it is measured from the left and right corners.

Install this unit in the corner at a 40º to 50º angle from the adjacent walls.

TV

DVD player/recorder

Digital satellite tuner/ Cable TV tuner/ Digital airwave tuner

QUICK REFERENCE GUIDEConnecting external components to this unit An object, such as furniture

Installing this unit Front left channel

Manual background Center channel

Manual background Front right channel

Manual background Surround left channel

Manual background Surround right channel

An object, such as furniture

40º to 50º

Manual background Front left channel

Manual background Center channel

Manual background Front right channel

Manual background Surround left channel

Manual background Surround right channel

DVD player/recorder

Video connection

ANALOG

VIDEO

OPTICAL

COAXIAL

AUDIO OUTPUT

INPUT

DIGITAL OUTPUT

DIGITAL OUTPUT

1

 

2

1. Pull out the cap

L

 

 

 

R

 

 

 

Optical cable

Pull out the cap before connecting the optical cable, and then check

HDMI

 

HDMI

INPUT

OUTPUT

 

 

 

 

 

 

 

 

 

 

HDMI connection

This connection is not necessary if your TV has a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner. Use the optical cable supplied with this unit to make an audio connection between your TV and this unit.

2. Check the direction

the direction to insert the cable.

1 (Sold separately)

2(Sold separately)

STBFor details, see “Connection example 1”.

DVD

Install this unit using a rack, etc.

Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first. In case you install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.

For further information on installation, see page 13 in the Owner’s Manual.

The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of cloth on the floor in step 2.

1Place this unit in front of

2Place this unit upside down

3Install this unit in the

4Installation is completed.

the rack.

and connect this unit to your

rack.

 

 

TV and DVD player/recorder.

 

 

1

2

3

4

YSP-3050

AUDIO INPUT

OUT

VIDEO INPUT

DIGITAL INPUT

 

 

VIDEO

COMPONENT

AUX 2

DVD

To the AC wall outlet

 

 

 

 

 

 

 

 

 

COAXIAL

 

* If TV built-in tuner is used, connect the

optical digital output jack on your TV to

the TV/STB OPTICAL DIGITAL INPUT

jack on this unit (see "Connecting a TV

without an HDMI cable" on page 21 in

the Owner's Manual).

YSP-3050

IN

OUT

HDMI

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background To the AC wall outlet

 

 

OPTICAL

 

 

AUX 1 TV/STB SUBWOOFER

DVD AUX 1

TV/STB

Subwoofer

Do not plug the power supply cable

 

 

 

 

into an AC wall outlet until all

connections are complete.

Audio connection

Subwoofer

OUT

VIDEO

 

Audio connection

 

SUBWOOFER

Do not plug the power supply cable into an AC wall outlet until all connections are complete.

y Hint

•To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.

•You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions supplied with the metal wall bracket.

Note

Be careful not to leave scratches on this unit or the rack.

*The rear panel illustration shows jacks and their names to help you find them easily. They are not exactly the same as the ones on the actual rear panel of this unit.

Note

Check whether the digital audio output of your TV and DVD player/recorder is turned on.

If you have connected external components,

 

follow the steps on the backside to start the

Continued

AUTO SETUP procedure.

on the back

 

 

yHint

If you connect this unit to an HDMI control-compatible TV (except some models) via HDMI, you can use the remote control supplied with your TV to turn on or off the power, select the audio output component, and adjust the volume level of this unit.

Note

Check whether the digital audio output of your TV and DVD player/recorder is turned on.

If you have connected external components,

 

follow the steps on the backside to start the

Continued

AUTO SETUP procedure.

on the back

 

 

Printed in Malaysia

WK75620 [En]

©2008

 

All rights reserved.

 

Page 116 Page 118
Image 117
Page 116 Page 118
Contents Digital Sound ProjectorTM YSP-3050IMPORTANT SAFETY INSTRUCTIONS Explanation of Graphical Symbolsi En We Want You Listening For A Lifetime FCC INFORMATION for US customersii En iii En Caution: Read this before operating this unit1 En ContentsOverview 2 EnR C SR L SL Versatile Remote Control FeaturesAUTO SETUP IntelliBeam 3 En4 En 1Install this unit in your listening room Using this manual4Run AUTO SETUP 6Change the beam modes and/or CINEMA DSP settingsRemote control ⋅1 Supplied accessories6 En Fasteners ⋅4 Cable clamp ⋅16VOLUME +/– 3Remote control sensorControls and functions Front panel2TUNER indicators 1HDMI indicator3CINEMA DSP indicator 4PCM indicatorRear panel HAC power supply cable9 En 1ANTENNA jack3Transmission indicator Remote control6AUTO SETUP AVOLUME +/–IAV POWER HTV POWER11 En FDVD player/VCR control buttons12 En 1PRESET/TUNE2Numeric buttons 3Cursor buttons / / / , ENTERBefore installing this unit InstallationInstalling this unit Parallel installation14 En Installation examplesExample ExampleUsing a rack Using a metal wall bracketUsing a stand 15 EnThis unit Connections16 En For audio inputNotes on connecting the optical cable Before connecting componentsPriority order for audio input signals Audio signals18 En Case 1: Connections using HDMI cablesAudio/Video AHDMI cableAudio/Video 19 EnAudio Notes20 En Case 3: Connecting other connection methodsVideo Audio21 En Connecting a TV without an HDMI cableVideo AudioConnecting a subwoofer Connecting a portable audio player22 En AudioConnecting the AC power supply cable Connecting the FM antennaAbout the IR IN jack 23 EnOperation range of the remote control Installing batteries in the remote control3Close the battery cover Getting startedTV/STB VOLUMEMY SUR 25 En3Turn on the power of your TV Using SET MENUSET MENU Displaying the OSD on-screendisplayRun LANGUAGE SETUP The flow chart of SET MENURun AUTO SETUP IntelliBeam Run MANUAL SETUPChanging OSD language LANGUAGE SETUPSET MENU 28 EnThe flow chart of AUTO SETUP AUTO SETUP IntelliBeam29 En Beam optimization30 En Installing the IntelliBeam microphone12 34 Using AUTO SETUP IntelliBeam31 En Assembling the supplied cardboard4 Press / to select AUTO SETUP and press ENTER AUTO SETUP32 En 2Set the operation mode selector to YSPAUTO SETUP START AUTO SETUPstarting the AUTO SETUP procedure 7 Press ENTER to start the AUTO SETUPSHOW RESULT SHOW RESULT34 En Before the AUTO SETUP procedure starts Error messages for AUTO SETUPWhile the AUTO SETUP procedure is in progress ERROR E-2Saving settings Using the system memorySET MENU 2MEMORY SAVESET MENU Loading settingsMEMORY 2MEMORY SAVE1MEMORY LOAD 1MEMORY LOADSET MENU 1MEMORY LOADPlayback Remote control operationsSelecting the input source T V / S T BA U X 1Turn on the power of your DVD playerA U T O A U XD V D Adjusting the volume5 B E A M O F FRemote control functions FM tuning2PRESET/TUNE FM controls and functionsManual tuning Automatic tuning4Press ENTRY / once to begin automatic tuning M H zindicator disappears from the front panel Automatic preset tuning8 8 . M H z5 Press ENTRY / to select a preset Manual preset tuningindicator is flashing station groups with 8 preset station numbers eachpreset station number 1 to Selecting a preset stationA1:FM 88.9Connecting XM Mini-TunerHome Dock XM Satellite Radio tuning47 En About XM Satellite RadioBasic XM Satellite Radio operations Activating XM Satellite Radio001 Preview 48 EnALL CH CAT SEARCHSEARCH 49 EnPreset Search mode PRESET SEARCHDirect Number Access mode ALL CH SEARCHa preset number while the MEMORY indicator Presetting the XM Satellite1Search for an XM channel that you want to preset Radio channelsWhen the artist name / song title is displayed When the channel category is displayed043 XMU <CAT>ROCKConnection Using iPodControlling iPod 53 Enand the DOCK indicator lights up and the DOCK indicator lights upi P o d i P o dSettings parameters Shuffle Shuffle 55 EnRepeat Repeat 5 Beam Enjoying surround sound56 En Notes3 Beam Stereo plus 3 BeamMy Surround 57 EnInput channel indicators Decoder indicators58 En Surround modes and recommended sourcesEnjoying 2-channelsources switch between surround modesin surround sound 59 EnEnjoying TV in surround sound 5Press VOLUME +/– to adjust the volume level60 En 1Select the TV channel you want to watchWhen Dolby Pro Logic II Music is selected Adjusting surround mode parametersWhen DTS Neo:6 Music is selected 3Press / to configure the selected parameter5-channelstereo playback Enjoying stereo sound2-channelstereo playback 5CH STEREOPlaying back sound clearly My Beam Using auto-adjustfunction63 En 1Set the operation mode selector to YSPA N G L E Using manual-adjustfunction64 En 1Set the operation mode selector to YSPWhat is a sound field? Using sound field programs65 En Elements of a sound field66 En CINEMA DSP programsMusic program Movie programL E V E L Adjusting CINEMA DSP effect levels0 d B D S P68 En Using the music enhancerENHANCER:HIGH ENHANCER:LOW ENHANCER:OFF 1Set the operation mode selector to YSPNight listening enhancer/TV volume equal mode Using the volume modeNIGHT:CINEMA NIGHT:MUSIC TV EQUAL VOLUME OFF 3 Press / to adjust the effect level ofunit to confirm the setting for the sleep timer Using the sleep timerThe SLEEP indicator lights up in the front panel 70 EnO F F Canceling the sleep timerS L E E P 71 EnD.DGTL:48kHz Displaying the input source information72 En 1Set the operation mode selector to YSP73 En Using the HDMI control feature74 En MANUAL SETUPSOUND MENU BEAM MENUUsing MANUAL SETUP MANUAL SETUP3Press / to select MANUAL SETUP and press ENTER SET MENUASETTING PARAMETERS 3/3 ASETTING PARAMETERS 1/3SETTING PARAMETERS Setting parameters 2BEAM MENUaHORIZONTAL ANGLE 1/5 BEAM ADJUSTMENT Beam adjustment77 En NotesbBEAM TRAVEL LENGTH cFOCAL LENGTH78 En BEAM TRAVEL LENGTH Beam travel lengthCIMAGE LOCATION dTREBLE GAIN79 En IMAGE LOCATION Image location1SOUND MENU SUBWOOFER SET Subwoofer settingsATONE CONTROL CMUTE LEVELDAUDIO DELAY Dynamic range of Dolby Digital and DTS signalsEROOM EQ GTruBassBINPUT MODE 3INPUT MENUINPUT MENU AINPUT ASSIGNMENT 2/383 En DINPUT RENAMEINPUT TRIM Input trim INPUT RENAME Input renameEHDMI SET HDMI SET HDMI settingsaSUPPORT AUDIO bAUDIO SELECTfHDMI CONTROL eASPECT RATIOFXM ANTENNA LEVEL 85 EnOSD SET OSD settings F.DISPLAY SET Front panel display settingsUNIT SET Unit settings 4DISPLAY MENUUsing the test tone Adjusting the audio balance3Press / to select the channel you want to adjust 4Press / to adjust the channel volume5 Press TEST when you have completed all Using the audio output being played backyour adjustments 88 En3Press / to adjust the channel volume 89 EnNotes 90 En Selecting the input modeAUTO TV/STBUsing the system parameters Adjusting the system parameters6Use / to select and change the parameter setting P R O T E C TMAX VOLUME Parameter settingsTURN ON VOLUME P R O T E C TFACTORY PRESET Parameter settingsP R E S E T 93 EnSetting remote control codes Remote control features94 En CODE SETControlling other components 4TV POWER95 En Operating your TV3AV POWER 4AV POWER96 En Operating your DVD player/recorderRemote control features 4AV POWER97 En Operating your VCR5Press ENTER to confirm the macro setting Using the TV macro98 En 2Press MACRO while holding down CODE SET3Press ENTER to cancel the macros Canceling the macros5 Press ENTER to confirm the setting 99 Enwhen STANDBY/ON is Troubleshootingpower has been turned on 100 Enwhen a subwoofer is not indicator does not light up inMy Beam auto-adjust 101 EnThe remote control does not Remote controlauto-adjustfunction Error message103 En XM Satellite RadioiPod 104 En GlossaryDolby Digital Dolby Pro LogicLFE 0.1-channel 105 EnNeural Surround PCM Linear PCMIndex 106 EnNumerics 107 En SpecificationsAMP SECTION SPEAKER SECTIONList of remote control codes DVD PLAYERCABLE TV TUNER SATELLITE TUNER Page Page Printed in Malaysia WK756002008 All rights reserved Installing this unit Connecting external components to this unitYSP-3050 QUICK REFERENCE GUIDEEnjoying surround sound 3 Carry out the AUTO SETUP IntelliBeamEnjoying DVDs in surround sound Enjoying TV in surround sound
Top Page Image Contents