Yamaha YSP-3050 Adjusting the audio balance, Using the test tone, T E S T, F R O N T, 87 En

Adjusting the audio balance

You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience.

Using the test tone

You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use this to set the channel levels so that the volume level of each channel is identical when heard from your listening position.

ENHANCER ENTRY MENU

CAT/	TV/AV
	ENTER
A-E
	YSP

DISPLAYRETURN

VOLUME	CH	TV VOL
MUTE	TV INPUT	TV MUTE
CH LEVEL	TEST	CODE SET

1Set the operation mode selector to YSP.

TV/AV

YSP

2Press TEST.

“TEST FRONT L” appears in the front panel display and a test tone is output from the front left channel.

TEST

3Press / to select the channel you want to adjust.

The front panel display changes as follows:

TEST FRONT L

ENTER

TEST CENTER

TEST FRONT R

TEST SUR.R

TEST SUR.L

TEST SUBWOOFER

Note

“TEST SUBWOOFER” is only available when a subwoofer is connected to this unit and SUBWOOFER is selected for BASS OUT in SOUND MENU (see page 80).

4Press / to adjust the channel volume.

ENTER

Control range: –10.0 dB to +10.0 dB

OPERATION ADVANCED

T E S T F R O N T L

English

87 En