PLAYING AN AUDIO FILE (EX-M2 Only)
Basic Remote Controller Operations
●To start playback
Press the [
] button. The remote controller beeps to indicate that playback has started.
•Pressing the [
] button while the camera is off turns on power and starts playback.
●To pause playback
Press the [ 
] button (remote controller beeps).
Pressing the [
] button resumes playback (remote controller beeps).
•If you leave playback paused for about two minutes, the camera and remote controller turn off automatically.
●To fast forward the playback
Hold down the [
] button for a few seconds until fast forward starts.
●To fast reverse the playback
Hold down the [
] button for a few seconds until fast reverse starts.
●To skip to the beginning of the current track Press the [
] button (remote controller beeps).
To skip to the beginning of a previous track, press the [
] button multiple times (remote controller beeps). The current track number is shown on the LCD.
●To skip to the beginning of the next track
Press the [
] button (remote controller beeps).
To keep skipping forward, press the [
] button multiple times (remote controller beeps). The current track number is shown on the LCD.
●To stop playback
Press the [
] button (remote controller beeps).
●To adjust volume
Press the [+] or
●To turn off power
Press the camera’s power button.
•Camera power also turns off automatically if you do not perform an operation for about 10 seconds after play- back is stopped.
IMPORTANT! 
•The button operation tone does not sound if the camera’s button tone function is turned off (page 72).
•You cannot use fast forward, fast reverse, or skip while the current volume level is shown on the LCD.