Casio EX-S2/EX-M2 manual Changing the Date and Time Setting

OTHER SETTINGS

IMPORTANT!

•You can select any one of the following types of image as the startup image.

—The camera’s built-in startup image

—A snapshot you recorded with the camera

—A movie you recorded with the camera two sec- onds or less in length and 200KB or less in size

•The snapshot image or movie that you select as the startup image is stored in a special memory location called “startup image memory.” Only one image can be stored in startup image memory. Selecting a new startup image overwrites anything that is already stored in startup image memory. Except for the camera’s built-in startup image, if you want to return to a previous startup image, you need to have a separate copy of that image in the camera’s standard image storage memory.

Changing the Date and Time Setting

Use the following procedure to change the date and time setting.

1.In the REC mode or PLAY mode, press MENU.

2.Select the “Set Up” tab, select “Adjust”, and then rock the controller to the right.

3.Set the date and the time.

To do this:	Do this:
Change the setting at the	Rock the controller up or
current cursor location	down.
Move the cursor between	Rock the controller left or
settings	right.

4.Click to register the settings and exit the set- ting screen.

73